Fishing line

From Wikipedia, the free encyclopedia

Fishing line is any cord made for fishing. Important parameters of a fishing line are its length, material, and weight (thicker, sturdier lines are more visible to fish). Factors that may determine what line an angler chooses for a given fishing environment include breaking strength, knot strength, UV resistance, castability, limpness, stretch, abrasion resistance, and visibility.

1 Early Developments
2 Modern Lines
- 2.1 Specialty Lines
3 Preventing Line Breakage
4 See also
5 References

[edit] Early Developments

Fishing lines were often constructed from horse hair or silk thread, with catgut leaders. From the 1850s, modern industrial machinery was employed to fashion fishing lines in quantity. Most of these lines were made from linen, silk, and more rarely cotton or flax, sometimes with a waterproofing compound added during line.^[1]

[edit] Modern Lines

Modern fishing lines intended for spinning, spin cast, or bait casting reels are almost entirely made from artificial substances, including nylon, polyethylene, Dacron and Dyneema (UHMWPE). The most common type is monofilament, made of a single strand. Recently, other alternatives to standard nylon monofilament lines have been introduced made of copolymers or fluorocarbon, or a combination of the two materials. Flurocarbon in particular is well regarded for its refractive index, which is similar to that of water and as a result less visible to fish. There are also braided, cofilament and thermally fused lines, also known as 'superlines' for their small diameter, lack of stretch, and great strength relative to standard nylon monofilament lines. Both braided and thermally fused 'superlines' are now readily available.

[edit] Specialty Lines

Fly lines consist of a tough braided or monofilament core, wrapped in a thick waterproof plastic sheath, often of polyvinyl chloride (PVC). In the case of floating fly lines, the PVC sheath is usually imbedded with many 'microballoons' or air bubbles, and may also be impregnated with silicone or other lubricants to give buoyancy and reduce wear. In order to fill up the reel spool and ensure an adequate reserve in case of a run by a powerful fish, fly lines are usually attached to a secondary line at the butt section, called backing. Fly line backing is usually composed of braided dacron or gelspun monofilaments. All fly lines are equipped with a leader of monofilament or flourocarbon fishing line, usually (but not always) tapered in diameter, and referred to by the 'X-size' (0X, 2X, 4X, etc.) of its final tip section, or tippet.

Wire lines are frequently used as leaders to prevent the fishing line from being severed by toothy fish. Usually braided from several metal strands, wire lines may be made of stainless steel, titanium, or a combination of metal alloys.

[edit] Preventing Line Breakage

Any time you catch a big fish or get a temporary snag take the last couple feet of line and run it through your lips. If you feel a knick cut the line and retie your lure.
When tying a knot make sure you lubricate the line with saliva before tightening. This will make a much tighter knot.
Pass a Q-Tip through the eyes of your fishing rod. If any material gets caught to the eye it needs to be fixed. If not it could damage your line.
Always change your line at least 1 time per year.