Soundproofing
From Wikipedia, the free encyclopedia
Soundproofing is any means of reducing the intensity of sound with respect to a specified source and receptor. There are several basic approaches to reducing sound: increasing the distance between source and receiver, using noise barriers to block or absorb the energy of the sound waves, using damping structures such as sound baffles, or using active antinoise sound generators.
Soundproofing affects sound in two different ways: noise reduction and noise absorption. Noise reduction simply blocks the passage of sound waves through the use of distance and intervening objects in the sound path. Noise absorption, on the other hand, operates by transforming the sound wave. Noise absorption involves suppressing echoes, reverberation, resonance and reflection. The damping characteristics of the materials it is made out of are important in noise absorption.
Contents |
[edit] Distance
The use of distance to dissipate sound is straightforward. The energy density of sound waves decrease as they spread out, so that increasing the distance between the receiver and source results in a progressively lesser intensity of sound at the receiver. In a normal three dimensional setting, the intensity of sound waves will be attenuated according to the inverse square of the distance from the source. Using mass to absorb sound is also quite straightforward, with part of the sound energy being used to vibrate the mass of the intervening object, rather than being transmitted. When this mass consists of air the extra dissipation on top of the distance effect is only significant for typically more than 1000 meters, depending also on the weather and reflections from the soil.[1]
[edit] Damping
Damping is the process by which sonic vibrations are converted into heat over time and distance. This can be achieved in several ways. For example, use of a material such as lead that is both heavy and soft, with the softness allowing it to damp the noise rather than allowing transmission. Making a sound wave transfer through different layers of material with different densities also assists in noise damping. This is the reason why open-celled foam is a good sound damper; the sound waves are forced to travel through multiple foam cells and their cell walls as sound travels through the foam medium. Improperly done, however, structural compliance can make things worse, enabling resonance. This process is analogous to a string holding wind-chimes: the string helps the chimes ring by isolating the vibration instead of damping it. Foam tapes may therefore be undependable in a soundproofing protocol.
[edit] Room Within A Room
A Room Within A Room (RWAR) is one method of isolating sound and stopping it transmitting to the outside world where it may be undesirable.
Most vibration / sound transfer from a room to the outside occurs through mechanical means. The vibration passes directly through the brick, woodwork and other solid structural elements. When it meets with an efficient sound board such as a wall, ceiling, floor or window, the vibration is amplified and heard in the second space. A mechanical transmission is much faster, more efficient and may be more readily amplified than an airborne transmission of the same initial strength.
The use of acoustic foams and other absorbent means are useless against this transmitted vibration. The user is required to break the connection between the room that contains the noise source and the outside world. This is called acoustic de-coupling. Ideal de-coupling involves eliminating vibration transfer in both solid materials and in the air, so air-flow into the room is often controlled. This has safety implications, for example proper ventilation must be assured and gas heaters cannot be used inside de-coupled space.
There are very successful professional products and methods available but such a construction is definitely within the reach of competent do-it-yourselfer.[2] Costs vary depending on the individual space, but it is clear that by doing it oneself, an individual can approximate the same result as professionals and save a substantial amount of money
[edit] Noise cancellation
Noise cancellation generators for active noise control are a relatively modern innovation. A microphone is used to pick up the sound that is then analyzed by a computer; then, sound waves with opposite polarity (not phase) are output through a speaker, causing destructive interference and cancelling much of the noise.
[edit] Noise barriers as exterior soundproofing
Since the early 1970s it has become common practice in the United States (followed later by many other industrialized countries) to engineer noise barriers along major highways to protect adjacent residents from intruding roadway noise. The technology exists to predict accurately the optimum geometry for the noise barrier design. Noise barriers may be constructed of masonry, earth or a combination thereof. One of the earliest noise barrier designs was in Arlington, Virginia adjacent to Interstate 66, stemming from interests expressed by the Arlington Coalition on Transportation. Possibly the earliest scientifically designed and published noise barrier construction was in Los Altos, California in 1970.
[edit] See also
[edit] References
- ^ The combined effect of distance and dissipation in air is implemented in this calculator.
- ^ Here is one example of a successful DIY Sound Proofing project that shows some of the problems and successes in the construction of a RWAR.
