Photovoltaics

From Wikipedia, the free encyclopedia

Photovoltaics, or PV for short, is a solar power technology that uses solar cells or solar photovoltaic arrays to convert energy from the sun into electricity. Photovoltaics is also the field of study relating to this technology.

Solar cells produce direct current electricity from the sun’s rays, which can be used to power equipment or to recharge a battery. Many pocket calculators incorporate a solar cell.

When more power is required than a single cell can deliver, cells are generally grouped together to form “PV modules”, or solar panels, that may in turn be arranged in arrays. Such solar arrays have been used to power orbiting satellites and other spacecraft and in remote areas as a source of power for applications such as roadside emergency telephones, remote sensing, and cathodic protection of pipelines. The continual decline of manufacturing costs (dropping at 3 to 5% a year in recent years[citation needed]) is expanding the range of cost-effective uses including roadsigns, home power generation and even grid-connected electricity generation.

Large-scale incentive programs, offering financial incentives like the ability to sell excess electricity back to the public grid ("feed-in"), have greatly accelerated the pace of solar PV installations in countries like Japan, Germany, and United States which taken together account for the majority of the more than 4 GW of cumulative PV capacity installed worldwide.

Photovoltaic 'tree' in Styria, Austria
Photovoltaic 'tree' in Styria, Austria

Contents

[edit] Current development

Average solar irradiance, watts per square metre. Note that this is for a horizontal surface, whereas solar panels are normally propped up at an angle and receive more energy per unit area.
Average solar irradiance, watts per square metre. Note that this is for a horizontal surface, whereas solar panels are normally propped up at an angle and receive more energy per unit area.

Many corporations and institutions are currently developing ways to increase the practicality of solar power. While private companies (such as BP Solar) conduct much of the research and development on solar energy, colleges and universities also work on solar-powered devices. There is considerable work being carried out in the area of Photovoltaic and renewable energy engineering in Australia.

The most important issue with solar panels is cost. Because of much increased demand, the price of silicon used for most panels is now experiencing upward pressure.[citation needed] This has caused developers to start using other materials and thinner silicon to keep cost down (see, for example, the work of Professor Andrew Blakers). Due to economies of scale solar panels get less costly as people use and buy more — as manufacturers increase production, the cost is expected to continue to drop in the years to come. As of early 2006, the average cost per installed watt for a residential sized system was about USD 6.50 to USD 7.50, including panels, inverters, mounts, and electrical items.[citation needed]

Grid-tied systems represented the largest growth area. In the USA, with incentives from state governments, power companies and (in 2006 and 2007) from the federal government, growth is expected to climb.[citation needed] Net metering programs are one type of incentive driving growth in solar panel use. Net metering allows electricity customers to get credit for any extra power they send back into the grid. This causes an interesting role reversal, as the utility company becomes the buyer, and the solar panel owner becomes the seller of electricity. To spur growth of their renewable energy market, Germany has adopted an extreme form of net metering, whereby customers get paid 8 times what the power company charges them for any surplus they supply back to the grid.[citation needed] That large premium has created huge demand for solar panels in that country.

[edit] PV in buildings

The CIS Tower, Manchester, England, was clad in PV panels at a cost of £5.5 million. It started feeding electricity to the national grid in November 2005.
The CIS Tower, Manchester, England, was clad in PV panels at a cost of £5.5 million. It started feeding electricity to the national grid in November 2005.

Building-integrated photovoltaics (BIPV) are increasingly incorporated into new domestic and industrial buildings as a principal or ancillary source of electrical power,[1] and are one of the fastest growing segments of the photovoltaic industry.[2] Typically, an array is incorporated into the roof or walls of a building, and roof tiles with integrated PV cells can now be purchased. Arrays can also be retrofitted into existing buildings; in this case they are usually fitted on top of the existing roof structure. Alternatively, an array can be located separately from the building but connected by cable to supply power for the building.

Where a building is at a considerable distance from the public electricity supply (or grid) - in remote or mountainous areas – PV may be the only possibility for generating electricity, or PV may be used together with wind and/or hydroelectric power. In such off-grid circumstances batteries are usually used to store the electric power. However, the largest installations are grid-connected systems (see table below).

[edit] Solar-powered vehicles

There is intensive research interest in solar-powered vehicles and the technology is developing rapidly. Solar-powered cars have commonly appeared at solar races such as the World Solar Challenge and at car and technology shows. Solar boats are a new application of the technology. Solar Boats from colleges and universities compete in the Solar Splash[1] competition in North America, and the Frisian Nuon Solar Challenge[2] in Europe and Asia.

[edit] PV power stations

Deployment of solar power depends largely upon local conditions and requirements. But as all industrialised nations share a need for electricity, it is clear that solar power will increasingly be used to supply a cheap, reliable electricity supply. In 2004 the worldwide production of solar cells increased by 60% but silicon shortages reduced growth afterwards.

The list below shows the largest photovoltaic plants in the world. For comparison, the largest non-photovoltaic solar plant, the solar trough-based SEGS in California produces 350 MW and the largest nuclear reactors generate more than 1,000 MW. A Solar power station in Victoria, Australia, which will not come into service until 2010, is expected to be 154 MW when it is completed in 2013.[3]

World's largest PV power plants[3]
DC Peak Power Location Description MW·h/year Coordinates
154 MW** Mildura/Swan Hill, Australia[4] Heliostat Concentrator Photovoltaic technology (see Solar power station in Victoria) n.a. n.a.
52 MW** Moura, Portugal n.a. n.a. n.a.
40 MW* Muldentalkreis, Germany[5] [6] 550,000 thin-film modules (First Solar) (see Waldpolenz Solar Park) 40,000 MW·h 51°19′43″N, 12°39′20″E
20 MW** Beneixama, Spain[7][8][9] Tenesol, Aleo and Solon solar modules with Q-Cells cells 30,000 MW·h 38°43′26″N, 0°43′48″W
12 MW Gut Erlasee, Germany[10] 1408 SOLON mover 14,000 MW·h n.a.
11 MW Serpa, Portugal[11] 52,000 solar modules n.a. n.a.
10 MW Pocking, Germany 57,912 solar modules 11,500 MW·h n.a.
6.3 MW Mühlhausen, Germany[12] 57,600 solar modules 6,750 MW·h 49°09′29″N, 11°25′59″E
5.2 MW Kameyama, Japan 47,000 square meters on Sharp LCD factory roof n.a. 34°52′15″N, 136°24′19″E
5 MW Bürstadt, Germany 30,000 BP solar modules 4,200 MW·h n.a.
5 MW Espenhain, Germany 33,500 Shell solar modules 5,000 MW·h n.a.
4.59 MW Springerville, AZ, USA 34,980 BP solar modules 7,750 MW·h 34°17′48″N, 109°16′2″W
4 MW Geiseltalsee, Merseburg, Germany 25,000 BP solar modules 3,400 MW·h n.a.
4 MW Gottelborn, Germany 50,000 solar modules (when completed) 8,200 MW·h (when completed) n.a.
4 MW Hemau, Germany 32,740 solar modules 3,900 MW·h n.a.
3.9 MW Rancho Seco, CA, USA n.a. n.a. 38°20′31″N, 121°07′1″W
3.3 MW Dingolfing, Germany Solara, Sharp and Kyocera solar modules 3,050 MW·h n.a.
3.3 MW Serre, Italy 60,000 solar modules n.a. n.a.

* Project finish date: 2009

** Under construction, as of spring 2007

[edit] Worldwide installed photovoltaic totals

Total peak power of installed solar panels is around 5,300 MW as of the end of 2005. (IEA statistics appear to be under-reported: they report 2,600 MW as of 2004, which with 1,700 installed in 2005 would be a cumulative total of 4,300 for 2005). The three leading countries (Japan, Germany and the USA) represent 90% of the total worldwide PV installations. A view of the deployments of solar power of all types is given at Deployment of solar power to energy grids.

Installed PV Power as of the end of 2005[13]
Country PV Capacity
Cumulative Installed in 2005
Off-grid PV [kW] Grid-connected [kW] Total [kW] Total [kW] Grid-tied [kW]
Japan 87,057 1,334,851 1,421,908 289,917 287,105
Germany 29,000 1,400,000 1,429,000 635,000 632,000
United States 233,000 246,000 479,000 103,000 70,000
Australia 41,841 8,740 60,581 8,280 1,980
Spain 15,800 41,600 57,400 20,400 18,600
Netherlands 4,919 45,857 50,776 1,697 1,547
Italy 12,300 15,200 37,500* 6,800 6,500

* Original source gives these individual numbers and totals them to 37,500 KW. The 2004 reported total was 30,700 KW.[14] With new installations of 6,800 KW, this would give the reported 37,500 KW.

[edit] PV power costs

The table below shows the total cost in US cents per kWh of electricity generated by a photovoltaic system. The row headings on the left show the total cost, per peak kilowatt (kWp), of a photovoltaic installation. The column headings across the top refer to the annual energy output in kWh expected from each installed kWp. This varies by geographic region because the average insolation depends on the average cloudiness and the thickness of atmosphere traversed by the sunlight. It also depends on the path of the sun relative to the panel and the horizon.

Panels are usually mounted at an angle based on latitude, and often they are adjusted seasonally to meet the changing solar declination. Solar tracking can also be utilized to access even more perpendicular sunlight, thereby raising the total energy output. The calculated values in the table reflect the total cost in cents per kWh produced. They assume a 10% total capital cost (for instance 4% interest rate, 1% operating and maintenance cost, and depreciation of the capital outlay over 20 years). (Normally, photovoltaic modules have a 25 year warranty, but they should be fully functional even after 30-40 years.)

20 years 2400
kWh/kWp y
2200
kWh/kWp y
2000
kWh/kWp y
1800
kWh/kWp y
1600
kWh/kWp y
1400
kWh/kWp y
1200
kWh/kWp y
1000
kWh/kWp y
800
kWh/kWp y
200 $/kWp 0.8 0.9 1.0 1.1 1.3 1.4 1.7 2.0 2.5
600 $/kWp 2.5 2.7 3.0 3.3 3.8 4.3 5.0 6.0 7.5
1000 $/kWp 4.2 4.5 5.0 5.6 6.3 7.1 8.3 10.0 12.5
1400 $/kWp 5.8 6.4 7.0 7.8 8.8 10.0 11.7 14.0 17.5
1800 $/kWp 7.5 8.2 9.0 10.0 11.3 12.9 15.0 18.0 22.5
2200 $/kWp 9.2 10.0 11.0 12.2 13.8 15.7 18.3 22.0 27.5
2600 $/kWp 10.8 11.8 13.0 14.4 16.3 18.6 21.7 26.0 32.5
3000 $/kWp 12.5 13.6 15.0 16.7 18.8 21.4 25.0 30.0 37.5
3400 $/kWp 14.2 15.5 17.0 18.9 21.3 24.3 28.3 34.0 42.5
3800 $/kWp 15.8 17.3 19.0 21.1 23.8 27.1 31.7 38.0 47.5
4200 $/kWp 17.5 19.1 21.0 23.3 26.3 30.0 35.0 42.0 52.5
4600 $/kWp 19.2 20.9 23.0 25.6 28.8 32.9 38.3 46.0 57.5
5000 $/kWp 20.8 22.7 25.0 27.8 31.3 35.7 41.7 50.0 62.5

Kilowatt-hours per peak kilowatts per year at various locations:[15]

Equipment prices
  • Polycrystalline modules (manufacturing costs): ~$2,000 / kWp
  • Polycrystalline modules (commercial prices): from $3,490 up to $5,100 / kWp (8 m²/kWp)[16]
  • Installation: from $600 up to $2,000 / kWp (self-construction: from $100 up to $400 / kWp)
  • Inverter for grid feed-in: ~$400 /kWp[17]

[edit] Environmental impacts

Unlike fossil fuel based technologies, solar power does not lead to any harmful emissions during operation, but the production of the panels leads to some amount of pollution.

[edit] Greenhouse gases

Life cycle greenhouse gas emissions are now in the range of 25-32 g/kWh and this could decrease to 15 g/kWh in the future.[18] For comparison, a combined cycle gas-fired power plant emits some 400 g/kWh and a coal-fired power plant with Carbon capture and storage some 200 g/kWh. Nuclear power emits 25 g/kWh on average; only wind power is better with a mere 11 g/kWh.

[edit] Cadmium

One issue that has often raised concerns is the use of cadmium in Cadmium telluride (CdTe) modules (not all PV technologies use CdTe). Cadmium in its metallic form is a toxic substance that has the tendency to accumulate in ecological food chains. The amount of cadmium used in PV modules is relatively small (5-10 g/m2) and with proper emission control techniques in place the cadmium emissions from module production can be almost zero. Current PV technologies lead to cadmium emissions of 0.3-0.9 microgram/kWh over the whole life-cycle.[18] Most of these emissions actually arise through the use of coal power for the manufacturing of the modules, and coal and lignite combustion leads to much higher emissions of cadmium. Life-cycle cadmium emissions from coal is 3.1 microgram/kWh, lignite 6.2, and natural gas 0.2 microgram/kWh.

[edit] Energy return on investment

A key indicator of environmental performance is the ratio of electricity generated divided by the energy required to build and maintain the equipment. Of course, little is gained if it takes as much energy to produce the modules as they produce in their lifetimes. This ratio is called the energy return on investment (EROI) This should not be confused with the economic return on investment, which varies according to local energy prices, subsidies available and metering techniques. A related concept is the energy pay-back time, i.e. the time required to produce an amount of energy as great as what was consumed during production.

Alternative methods of calculating the EROI of photovoltaics attempt to account for the full spectrum of energy inputs.[4] Traditional EROI calculations only include direct energy inputs--for example, the energy used at the manufacturing plant to produce the pannels, and the energy required by machinery used to mine and refine silicon. These calculations, however, neglect to include the infinite regression of energy inputs required to support those functions--for example, the energy required to sustain the human labor at every point in the supply chain, energy required to manufacture the machines used to manufacture photovoltaics, etc. The alternate "price-estimated EROI" method attempts to account for this infinite regression of energy inputs with the hypothesis that the market price of photovoltaics best captures the totality of energy inputs to PV production, and that this price value can be compared to the value of the produced electricity to arrive at an EROI ratio. This method of EROI calculation has its own inherent problems--including discrepancies caused by subsidies and locally variable costs--but has the theoretical advantage of accounting for the full spectrum of energy inputs. Price-estimated EROI theory produces a much more pessimistic lifecycle EROI ratio of approximately 1:1 for the most advanced PV currently available to consumers.

Crystalline silicon PV systems presently have energy pay-back times of 1.5-2 years for South-European locations and 2.7-3.5 years for Middle-European locations. For silicon technology clear prospects for a reduction of energy input exist, and an energy pay-back of 1 year may be possible within a few years. Thin film technologies now have energy pay-back times in the range of 1-1.5 years (S.Europe).[18] With lifetimes of such systems of at least 30 years, the EROI is in the range of 10 to 30.

[edit] Grid parity

Grid parity is already reached in some regions. This means photovoltaic power is equal to or cheaper than grid power. Grid parity has been reached in Hawaii and many other islands that use diesel fuel to produce electricity.

In Italy PV power is cheaper than retail grid electricity since 2006. One kWh costs 21.08 -€cent/kWh. Italy has an average of 1,600 kWh/m2 (Sicily even 1,800 kWh/m2) sun power/year. At 4 % costs of capital, 25 years of depreciation and costs (including installation) of 4,600 €/kWp PV current costs are 20.91 €-cent/kWh. At large scale plants with 3,900 €/kWp the costs reduces to 17.75 €-cent/kWh and is 15 % cheaper. To reach a 19% PV power coverage in Italy, 34,000 MWp power must be installed. This means 0.09 % of the size of Italy. 9 % of the size of Sicily could produce 25 % of the power of the complete European Union (ca. 2,100 TWh/year).

[edit] Financial incentives

The political purpose of incentive policies for PV is to grow the industry even while the cost of PV is significantly above grid parity, to allow it to achieve the economies of scale necessary to reach grid parity. The policies are implemented to promote national energy independence, high tech job creation and reduction of CO2 emissions

Two incentive mechanisms are used:

  • investment subsidies:the authorities refund part of the cost of installation of the system,
  • feed in tariffs/net metering: the electricity utility buys PV electricity from the producer under a multiyear contract at a guaranteed rate.

With investment subsidies, the financial burden falls upon the taxpayer, while with feed-in tariffs the extra cost is distributed across the utilities' customer base. While the investment subsidy may be simpler to administer, the main argument in favour of feed in tariffs is the encouragement of quality. Investment subsidies are paid out as a function of the nameplate capacity of the installed system and are independent of its actual power yield over time, so reward overstatement of power, and tolerate poor durability and maintenance. Feed in tariffs reward the number of kWh produced over a long period of time.

The price paid per kWh under a feed in tariff exceeds the price of grid electricity. "Net metering" refers to the case where the price paid by the utility is the same as the price charged.

The Japanese government through its Ministry of International Trade and Industry ran a successful programme of subsidies from 1994 to 2003. By the end of 2004, Japan led the world in installed PV capacity with over 1.1 GW.[5]

In 2004, the German government introduced the first large scale feed in tariff system, under a law known as the 'EEG' (see below) which resulted in explosive growth of PV installations in Germany. The principle behind the German system is a 20 year flat rate contract. The value of new contracts is programmed to decrease each year, in order to encourage the industry to pass on lower costs to the end users.

Subsequently Spain, Italy, Greece and France introduced feed in tariffs. None have replicated the programmed decrease of FIT in new contracts though, making the German incentive relatively less and less attractive compared to other countries. The French FIT offers a uniquely high premium for building integrated systems.

In 2006 California approved the 'California Solar Initiative', offering a choice of investment subsidies or FIT for small and medium systems and a FIT for large systems. Incentives are scheduled to decrease in future depending as a function of the amount of PV capacity installed.

The price/kWh or kWp of the FIT or investment subsidies in stimulating the installation of PV is only one of three factors. The other two are insolation (the more sunshine, the less money is needed) and administrative ease of obtaining permits and contracts (Southern European countries are reputedly relatively complex)

The most significant incentives programs are listed here.

[edit] Germany

Situation as of 2007. [6]

The legal framework is the German Renewable Energy Sources Act (Erneuerbare-Energien-Gesetz – EEG), [7] amended version in force since 1 August 2004.

Feed in Tariffs:

  • Roof mounted <= 30 kWp : EUR 0.4921/kWh
  • Roof mounted 30 kWp to 100kWp: EUR 0.4681/kWh
  • Roof mounted over 100kWp: EUR 0.4630/kWh
  • Facade integrated as above + EUR 0.0500/kWh
  • Field installation EUR 0.3796/kWh

Contract duration 20 years, constant remuneration. New contracts will be 5% lower in value in 2008 (6.5% for field installations)

[edit] Spain

Situation as of 2006.

The legal framework is the Real Decreto (royal decree) 436/2004.

Feed in Tariff:

  • EUR 0.4214/kWh

Contract duration 25 years, linked to electricity price.

[edit] Greece

Situation as of 2006. [8]

Feed in Tariffs:

  • Mainland <= 100 kWp 0.45 €/kWh
  • Mainland > 100 kWp 0.40 €/kWh
  • Islands <= 100 kWp 0.50 €/kWh
  • Islands > 100 kWp 0.45 €/kWh

Contract duration 20 years, linked to inflation

Investment subsidies: Tax rebates and grants are available

[edit] France

Situation as of 2006. [9]

Legal basis: Arrêté du 10 juillet 2006

Feed in Tariffs (mainland, excluding DOM-TOMs):

  • EUR 0.30/kWh
  • Roof integrated EUR 0.55/kWh

Contract duration 20 years, linked to inflation.

Additional investment subsidies available as tax credits.

[edit] Italy

Situation as of March 2007.[10]

The legal framework is the Ministry for Industry decree issued on 5th August 2005. The system is known as "Conto Energia"

Feed in Tariffs (examples)[11]:

  • <3kWp building integrated: EUR 0.49/kWh
  • >20kWp building integrated: EUR 0.44/kWh
  • >20kWpfield installation : EUR 0.36/kWh

Contract duration 20 years, linked to inflation.

[edit] United States

[edit] California

Starting 1 Jan 2007[12]

Administrative basis: California Public Utilities Commission (PUC) decision of Aug. 24, 2006

Feed in Tariffs and Investment subsidies :

  • Systems >100 kWp: $0.39/kWh
  • Systems <100 kWp can choose either $2.50/Wp or $0.39/kWh

Additional investment subsidies available as federal tax credits.

Contract duration 5 years, constant remuneration

[edit] S Korea

as of Oct 11 2006

Feed in Tariffs:

  • Systems >30 kWp: KRW677.38/kWh
  • Systems <30 kWp: KRW711.25/kWh (ca $0.75, €0.60)

Additional subsidies available.

Contract duration 15 years, constant remuneration

[edit] Photovoltaics research institutes

There are many research institutions and departments at universities around the world who are active in photovoltaics research. Countries which are particularly active include Germany, Spain, Japan, Australia, China, and the USA.

Some universities and institutes which have a photovoltaics research department.

[edit] References

  1. ^ buildingsolar.com: Building Integrated Photovoltaics, Wisconsin Public Service Corporation, accessed: 2007-03-23.
  2. ^ Terrasolar, accessed: 2007-03-23.
  3. ^ World's largest photovoltaic power plants
  4. ^ 154MW Victoria (Australia) Project
  5. ^ Large photovoltaic plant in Muldentalkreis
  6. ^ World’s largest solar power plant being built in eastern Germany
  7. ^ Large photovoltaic plant in Beneixama
  8. ^ [http://city-solar-ag.com/index.php?id=185 Photovoltaic plant in Beneixama
  9. ^ Image of world's lagest solar plant
  10. ^ The largest photovoltaic plant
  11. ^ GE, SunPower, Catavento team on plant. BusinessWeek (2007-03-28). Retrieved on March 29, 2007.
  12. ^ Solarpark Bavaria
  13. ^ Table 1: Installed PV power in reporting IEA PVPS countries as of the end of 2005
  14. ^ Total photovoltaic power installed in IEA PVPS countries
  15. ^ Solar land area
  16. ^ €3,20/kWp = $4,16/kWp
  17. ^ Inverter and module prices
  18. ^ a b c Alsema, E.A.; Wild - Scholten, M.J. de; Fthenakis, V.M. Environmental impacts of PV electricity generation - a critical comparison of energy supply options ECN, September 2006; 7p. Presented at the 21st European Photovoltaic Solar Energy Conference and Exhibition, Dresden, Germany, 4-8 september 2006.

[edit] External links

[edit] See also

Energy Conversion   Edit
Solar power: Active solar | Barra system | Central solar heating plant | Energy tower | Photovoltaics | Solar cell | Solar combisystem | Solar panel | Solar pond | Solar power satellite | Solar power tower | Solar thermal energy | Solar tracker | Solar updraft tower | Passive solar | Trombe wall | Ocean thermal energy conversion
Wind power: Wind farm | Wind turbine
Hydroelectricity: Marine current power | Tidal power | Water turbine | Wave power | Run-of-the-river hydroelectricity
Biological: Mechanical biological treatment | Anaerobic digestion | Biomass
Chemical: Blue energy | Fuel cell | Hydrogen production
Geothermal power: Earth cooling tubes | Deep lake water cooling
Electricity generation: Distributed generation | Microgeneration | Sustainable community energy system
Storage: Thermal energy storage | Seasonal thermal store
Sustainability and Development of Energy   Edit
Conversion | Development and Use | Sustainable Energy | Conservation | Transportation