Melt spinning
From Wikipedia, the free encyclopedia
Melt spinning is a technique used for rapid cooling of liquids. A wheel is cooled internally, usually by water or liquid nitrogen, and rotated. A thin stream of liquid is then dripped onto the wheel and cooled, causing rapid solidification. This technique is used to develop materials that require extremely high cooling rates in order to form, such as metallic glasses. The cooling rates achievable by melt-spinning are on the order of 104-107Kelvin/s [1]
The melt spinner was developed by Pond And Maddin in 1969 as a continuous casting technique [1]. However the melt spinner is only able to produce small thin ribbon shaped specimens, some as thin as 10 micron. This limits melt spinning to mainly production of research specimens for alloys with high critical cooling rate, which are difficult to fabricate with other techniques.
[edit] References
 |
This article lacks information on the notability (importance) of the subject matter. Please help improve this article by providing context for a general audience, especially in the lead section. This article has been tagged since December 2006. (help, talk) |
