Open pan salt making

From Wikipedia, the free encyclopedia

It has been suggested that this article or section be merged with Salt evaporation pond. (Discuss)

Saltmen scooping common salt from a saltpan using skimmers

In the United States and the United Kingdom virtually all domestic salt is obtained by solution mining of underground salt formations.^[1] Salt is extracted from the Brine using vacuum pans, where brine is heated in a partial vacuum in order to lower the boiling point. In the past salt has been extracted by heating the brine in pans operating at normal atmospheric temperature, known as open pans.

1 History of open pan salt extraction
2 Occupations in an open pan salt works
3 See also
4 References

[edit] History of open pan salt extraction

The earliest examples of pans used in the solution mining of salt date back to prehistoric times and the pans were made of ceramics known as briquetage. Later examples were small (3ft square) pans made from lead.^[2] During the middle ages the pans started to be made from iron, firstly in pans 7ft by 8ft. Gradually the pans increased in size until 'common' salt pans 20ft wide and 30ft long were the norm.^[3] The change from lead to iron co-incided with a change from wood to coal for the purpose of heating the brine. Brine would be pumped into the pans, and concentrated by the heat of the fire burning underneath. As crystals of salt formed these would be raked out and more brine added.

Open salt pan at Saline Luisenhall, Germany.

[edit] Occupations in an open pan salt works

The following are historical names given to occupations in open pan salt works, primarily in Cheshire, England.^[4]

Lumpman: A lumpman would work on pans that made fine salt crystals, which were known as 'fine pans' or 'lump pans'. The quality of the salt depended on the state of the fires which crystallised the salt by forcing off the water. Therefore each pan had its own individual furnace and chimney, which the lumpman was responsible for controlling. Wooden moulds were filled with salt crystals from the pans to produce a hard block (lump) of fine salt. Lumpmen were paid piecework, and would start at 3 or 4 in the morning, and could expect to work 12-16 hour days.

Waller: A waller would be under the charge of the lumpman, and was responsible for the initial draining of the salt. Salt was drained by being raked to the side of the pans, and then transferred using skimmers onto the hurdle boards (walkways) around the pans. A waller is an ancient name for a saltmaker. He would have been hired on a daily basis.

Fireman: In addition to the fine pans there were other 'common pans', used to make coarser salt. Because the production of common salt required slower burning fires, it was possible for a single fireman to have charge of several common pans, which could be up to 80 feet long.
Pan-smith: This was originally the name given to the man who made the salt-making pans.

[edit] See also

[edit] References

^ Dennis S Kostick. Salt. Retrieved on January 29, 2007.
^ Early Salt Making. Lion Salt Works History and heritage. Retrieved on January 29, 2007.
^ Early Salt Making. Lion Salt Works History and heritage. Retrieved on January 29, 2007.
^ A few (of the many) salt occupations. Northwich, Cheshire, UK. Local Genealogy and Local History. Retrieved on December 16, 2006.