Cassette deck
From Wikipedia, the free encyclopedia
A cassette deck is a type of tape recorder for playing or recording audio compact cassettes. A deck was formerly distinguished from a recorder as being part of a stereo component system, while a recorder had a self-contained power amplifier and speakers. While the two terms are often now used interchangeably, a recorder is typically thought of as a small low-fidelity portable device, while a deck is a sophisticated high fidelity component.
Contents |
[edit] History
[edit] Origins
The cassette recorder was introduced by the Philips Corporation in 1963 and marketed in 1965 as a device for vocal dictation designed for portable use. It was not intended to be a replacement for reel-to-reel recorders. It enclosed both reels of the recording tape in a small case which eliminated the need to thread the tape through individual reels. The tape width was nominally 1⁄8 inch (actually 3.81 mm) and tape speed was 1.875 inches (4.76 cm) per second, which meant that sound quality was appropriate only for voice or dictation use at the time with high end response dropping off beyond 10 kHz and high noise levels.
Early recorders were hand held battery-powered devices with automatic gain control, intended for dictation and reporting, but by the mid 1970s, the cassette deck with manual level controls and VU meters became a commonplace component of home high fidelity systems. Eventually they replaced the reel-to-reel recorder, which had found only limited home use because of their large size, expense, and inconvenience of threading and rewinding the tape reels. A cassette can be removed in the middle of the tape without rewinding. Cassettes can also be used in automobile and personal portable applications. Users typically simply dub songs from records in sequence to make a "road tape".
In 1971, the Advent Corporation combined Dolby B-type tape-hiss-noise reduction system with chromium dioxide tape to create the Advent Model 201, the first high-fidelity cassette deck. Dolby B boosts treble levels well above the noise level, and reduces them on playback, while CrO2 used different bias and equalization settings to do much the same, and extended frequency response into high fidelity range beyond 15 kHz for the first time. This deck was based on a top loading mechanism by Wollensak, a division of 3M which was commonly used in audio / visual applications. It featured an unusual single VU meter which could be switched between or for both channels, and lever operated controls, similar to those used on reel-to-reel mechanisms.
Most other manufacturers adopted a standard top loading format with piano key controls, dual VU meters, and slider level controls. There was a variety of configuations leading to the next standard format in the late 1970s, which settled on front-loading (see main picture) with cassette well on one side, dual VU meters on the other, and later a dual-cassette format with meters in the middle. Mechanical controls were replaced with electronic solenoid pushbuttons, though low cost models would retain mechanical controls. Some models could search and count gaps between songs. Cassette players pioneered the modern set of control buttons, play, pause, stop, record, and "locking" fast forward and rewind which could be depressed once, and remain until stopped.
[edit] Widespread use
Cassette decks soon came into widespread use and were designed variously for professional applications, home audio systems, and for mobile use in cars, as well as portable recorders. From the mid 1970s to the late 1990s the cassette deck was the preferred music source for the automobile. Like an 8-track cartridge, it was relatively insensitive to vehicle motion, but it had reduced tape flutter, as well as the obvious advantages of smaller physical size and fast forward/rewind capability.
[edit] Performance improvements
Cassette decks reached their pinnacle of performance and complexity by the mid 1980s. Cassette decks from companies such as Nakamichi, Revox, and Tandberg incorporated advanced features such as multiple tape heads and dual capstan drive with separate reel motors. Auto-reversing decks came into popular use so the user did not need to flip the cassette manually to play the second side of the tape, and this became standard on factory installed automobile decks. The tape heads required repositioning to play each direction, though Nakamichi avoided this on one unit by physically rotating the entire cassette, leaving the heads stationary.
Three-head technology uses separate heads for recording and playback. This enables hearing playback during the recording. It was common on reel-to-reel decks, but more difficult for cassettes, which do not provide separate openings for record and playback heads. A cassette has one opening designed for the erase head, a center opening for the record / play head, and a third opening for the tape drive capstan. Some models squeezed a monitor head into the capstan area, and others combined separate record and playback gaps into a single headshell.
Cassette decks sold by Harmon Kardon and Japanese companies such as Aiwa, Akai, Denon, Pioneer, Sony, Teac, Technics and Yamaha were also common, with each company offering models of very high quality. The best units could record and play the full audible spectrum from 20 Hz to 20 kHz with wow and flutter less than 0.05% and very low noise.
A very good live cassette recording could rival the sound of an average commercial CD, though the quality of pre-recorded cassettes was usually lower than could be achieved in a high quality home recording. Cassettes remain popular for audio-visual applications. Some CD recorders incorporate a cassette well to allow both formats for recording meetings, church sermons and books on tape.
The Dolby noise reduction system was key to realizing low noise performance on slow, narrow, cassette tapes. It works by boosting high frequencies on recording and then restoring them, also lowering the constant high frequency noises. Enhanced versions including the newer C (in 1980) and S types, though the B system is the only standard supported on most high fidelity automobile decks. Some decks incorporated microprocessor programs to adjust tape bias automatically. Bang & Olufsen developed the HX-Pro headroom extension system in conjunction with Dolby Laboratories in 1982. This was used in many higher-end decks. Chromium dioxide was the first formulation for high fidelity, but it required a special bias and equalization and switch (II), later decks incorporated coded holes in the shell to detect this. TDK and Maxell adapted ferric formulations to mimic CrO2 which urban legend held would quickly wear out heads. Sony briefly tried FerriChrome which combined the best of both (III). Most decks today produce the best response with metal tapes which require yet another setting (IV), though they will play back at the II setting.
[edit] Noise reduction and fidelity
A variety of noise reduction and other schemes are used to increase fidelity, with Dolby B being almost universal for both prerecorded tapes and home recording. Dolby B was designed to address the high-end hiss inherent in cassette tapes, and along with improvements in tape formulation it helped the cassette win acceptances as a high-fidelity medium. At the same time, Dolby B provided acceptable performance when played back on decks that lacked Dolby circuitry, meaning there was little reason not to use it if it was available.
The main alternative to Dolby was the dbx noise reduction system, which achieved a high signal-to-noise ratio, but was essentially unlistenable when played back on decks that lacked the dbx decoding circuitry. Philips developed an alternative noise reduction system known as Dynamic Noise Limiter (DNL) which did not require the tapes to be processed during recording; this was also the basis of DNR noise reduction.[1]
Dolby later introduced Dolby C and Dolby S noise reduction, which achieved higher levels of noise reduction; Dolby C became common on high-fidelity decks, but Dolby S, released when cassette sales had begun to decline, never achieved widespread use. It was only licensed for use on higher end tape decks that included dual motors, triple heads, and other refinements.
Dolby HX Pro headroom extension was another Dolby invention that provided better high-frequency response by reducing the inaudible tape bias during the recording of strong high-frequency sounds, which had a bias effect of their own. Developed by Bang & Olufsen, it did not require a decoder to play back.
Other refinements to improve cassette performance included Tandberg's DYNEQ, Toshiba's ADRES and Telefunken's Hi-Com, and on some high-end decks, automatic recording bias and head azimuth adjustment.
By the late 1980s, thanks to such improvements in the electronics, the tape material and manufacturing techniques, as well as dramatic improvements to the precision of the cassette shell, tape heads and transport mechanics, sound fidelity on equipment from the top manufacturers far surpassed the levels originally expected of the medium. On suitable audio equipment, cassettes could produce a very pleasant listening experience. The best home decks could achieve 20 Hz-20 kHz frequency response with wow and flutter below 0.05%, and 70 dB of signal-to-noise ratio using Dolby C, up to 80 dB of signal-to-noise ratio using Dolby S, and 90 dB with dbx. Many casual listeners could not tell the difference between cassette and compact disc.
From the early 1980s, the fidelity of prerecorded cassettes began to improve dramatically. Whereas Dolby B was already in widespread use in the 1970s, prerecorded cassettes were duplicated onto poor quality tape stock at high speed and did not compare in fidelity to LPs. However, systems such as XDR, along with the adoption of higher-grade tape (such as chromium dioxide, but typically recorded in such a way as to play back at the normal 120 μs bias position), and the frequent use of Dolby HX Pro, meant that cassettes became a viable high-fidelity option, one that was more portable and required less maintenance than records. In addition, cover art, which had generally previously been restricted to a single image of the LP cover along with a minimum of text, began to be tailored to cassettes as well, with fold-out lyric sheets or librettos and fold-out sleeves becoming commonplace.
Some companies, such as Mobile Fidelity, produced audiophile cassettes in the 1980s, which were recorded on high-grade tape and duplicated on premium equipment in real time from a first-generation digital master. Unlike audiophile LPs, which continue to attract a following, these became moot after the Compact Disc became widespread.
[edit] In-car entertainment systems
A key element of the cassette's success was its use in in-car entertainment systems, where the small size of the tape was significantly more convenient than the competing 8-track cartridge system. Cassette players in cars and for home use were often integrated with a radio receiver, and the term "casseiver" was occasionally used for combination units for home use. In-car cassette players were the first to adopt automatic reverse ("auto-reverse") of the tape direction at each end, allowing a cassette to be played endlessly without manual intervention. Home cassette decks soon added the feature.
Cassette tape adaptors have been developed which allow newer media players to be used with existing cassette decks, including those in cars.
[edit] Maintenance
Cassette equipment needs regular maintenance, as cassette tape is a magnetic medium which is in physical contact with the tape head and other metallic parts of the recorder/player mechanism. Without such maintenance, the high frequency response of the cassette equipment will suffer.
One problem occurs when iron oxide (or similar) particles from the tape itself become lodged in the read head. As a result, the tape heads will require occasional cleaning to remove such particles. The metal capstan and the rubber pinch roller can become coated with these particles, leading them to pull the tape less precisely over the head; this in turn leads to misalignment of the tape over the head azimuth, producing noticeably unclear high tones, just as if the head itself were out of alignment.
In addition, the heads and other metallic components in the tape path (such as spindles and capstans) may become magnetised, and require demagnetization. Both Cassette demagnetizers and head-cleaning fluid are available. Isopropyl alcohol is commonly used as a tape head cleaner.
[edit] Decline in popularity
Analog cassette deck sales began to decline with the advent of the compact disc and other digital recording technologies such as digital audio tape (DAT), and MiniDisc. Philips responded with the digital compact cassette, but it failed to garner a significant market share and was withdrawn. Tascam, Marantz, Yamaha, Teac, Denon, Sony, and JVC are among the companies still manufacturing cassette decks in relatively small quantities for professional and niche market use. Computers can easily produce copies of entire CDs or convert tracks into MP3 or other format files for playback on portable digital music players such as the popular IPod.
Despite the decline in the production of cassette decks, these products are still valued by some. Some audiophiles believe that cassette deck technology, due to its analog nature, provides sound recordings superior to current digital technology, such as CDR and DAT. However, cassette decks are not considered by most people today to be either the most versatile or highest fidelity sound recording devices available. This is largely due to the removal of a tape type selector from nearly all boomboxes and shelf stereo systems. Without a tape selector to set proper bias and equalization settings, Type II [High Bias] and Type IV [Metal Bias] tapes could no longer be used. These tapes were intended for high fidelity CD reproduction, but without the tape selector, only low grade Normal Bias tape can be used thus leaving poor sound quality.
[edit] See also
- Tape deck
- Nakamichi and Revox. These corporate pages contains links to external sites relevant to cassette decks.
- high end audio. This page contains links to high-end audio companies, including companies formerly producing "high-end" audio gear such as cassette decks.
[edit] Notes
- ^ Circuit and description of DNL URL accessed August 25, 2006
[edit] External links
- Pictures of Cassette Decks – A Japanese language page, but containing pictures of historic cassette decks.
- Vintage Deck Pictures – An external link with pictures of vintage cassette decks and reel to reel decks.
- Audio Asylum Tape Trail – A discussion forum of interest to those involved in cassette technology.
- Vintage Cassette Decks - A collection of Vintage cassette decks of all brands.
