Ceramic resonator

From Wikipedia, the free encyclopedia

Please help improve this article or section by expanding it. Further information might be found on the talk page or at requests for expansion. This article has been tagged since January 2007.

A ceramic resonator is an electronic component that produces an oscillation at a specific frequency. It is used primarily as the source of the clock signal for digital circuits such as microprocessors.^[1] Ceramic resonators are also likely to be found in timing circuitry for a wide array of applications such as TVs, VCRs, automotive electronic devices, telephones, copiers, cameras, voice synthesizers, communication equipment, remote controls and toys.

[edit] Package

A typical ceramic resonator package has three connections. They come in both surface mount and through-hole varieties with a number of different footprints. The oscillation takes place across two of the pins (connections) and the third pin is connected to ground.^[2][3]

[edit] Composition

Ceramic resonators are made of high-stability piezoelectric ceramics, generally lead zirconium titanate (PZT) which functions as a mechanical resonator. When voltage is applied, its piezoelectric "vibration behavior" causes an oscillating signal. The thickness of the ceramic substrate determines the resonant frequency of the device.

A ceramic resonator is often used in place of quartz crystals as a reference clock or signal generator in electronic circuitry because of its lower cost and smaller size. It is used on circuits where frequency specifications aren't highly critical (quartz has a 0.001% frequency tolerance, while PZT has a 0.5% tolerance).

[edit] External links

• Technical Specifications of a Ceramic Resonator

[edit] References

1. ^ PIC12F675 Datasheet. [1]
2. ^ ZTT Series Datasheet. [2]
3. ^ AWSCR Series Datasheet. [3]

This electronics-related article is a stub. You can help Wikipedia by expanding it.