Certification of voting machines
From Wikipedia, the free encyclopedia
|
| Terminology: |
|---|
|
| Testing: |
|
| Voting Technology: |
| Voting system manufacturers: |
Various governments require a certification of voting machines.
In the United States there is only a voluntary federal certification for voting machines and each state has ultimate jurisdiction over certification, though most states currently require national certification for the voting systems.[1]
Contents |
[edit] Germany
In Germany the Physikalisch-Technische Bundesanstalt is responsible for certification of the voting machines for federal and European elections. The respective law is the Bundeswahlgeräteverordnung ("Federal voting machine edict"). The only machines certified so far are the Nedap ESD1 and ESD2.
[edit] United States
The US Election Assistance Commission has assumed federal responsibility for accrediting voting system test laboratories and certifying voting equipment through the Voting System Certification & Laboratory Accreditation Program.[1] The purpose of the program is to independently verify that voting systems comply with the functional capabilities, accessibility, and security requirements necessary to ensure the integrity and reliability of voting system operation, as established in the Voluntary Voting System Guidelines (VVSG). With this program the National Institute of Standards and Technology (NIST) will recommend labs for accreditation through its National Voluntary Laboratory Accreditation Program (NVLAP).
The VVSG provide a set of specifications and requirements against which voting systems can be tested to determine if the systems provide all of the basic functionality, accessibility and security capabilities required of these systems. In addition, the guidelines establish evaluation criteria for the national certification of voting systems.
The EAC's Technical Guidelines Development Committee, with technical support from NIST are tasked with developing an initial set of recommendations for each VVSG iteration.[2] After the initial draft guidelines are authored, they are sent to the EAC for review and revision and then released for public comment. Comments are reviewed and considered by the EAC in consultation with NIST in development of the final release.
[edit] 2007 VVSG
A draft version of the 2007 VVSG is currently being developed by the TGDC and NIST. It is due July 31, 2007.
[edit] 2005 VVSG
The 2005 VVSG, which significantly increased security requirements for voting systems and expand access, including opportunities to vote privately and independently, for individuals with disabilities, was unanimously adopted by the EAC in December 2005;[3] It was version of the federal certification standards. During the 90-day public comment period, EAC received more than 6,000 comments on the proposed guidelines. These comments and the proposed guidelines are available via the Kennesaw State University. The 2005 VVSG will go into affect 24 months after their final adoption (December 2007).
[edit] Certification origins and Roy Saltman
In February 1975 an interagency agreement was formed with General Accounting Office’s Office of Federal Elections (predecessor to the Federal Election Commission) and the National Bureau of Standards (predecessor to the National Institute of Standards and Technology) resulting in a March 1975 report, Effective Use of Computing Technology in Vote-Tallying [4]. This report highlighted "the lack of appropriate technical skills at the State and local level for developing or implementing written standards, against which voting system hardware and software could be evaluated."
The U.S. Congress then directed the Federal Election Commission (FEC), in conjunction with the National Bureau of Standards to create engineering and procedural performance standards for voting systems. Another report, Voting System Standards: A Report on the Feasibility of Developing Voluntary Standards for Voting Equipment was produced in early 1984[5]. In July of 1984 the FEC armed with congressionaly appropriated funds began a six year task of creating the first national performance and test standards for punchcard, marksense, and direct recording electronic voting systems.
The resulting body of work was the first set of voluntary Voting System Standards issued in 1990[6].
[edit] FEC and NASED
In addition to their involvement in the origins of national voting certification and testing, the FEC's Office of Election Administration and the National Association of State Election Directors (NASED) updated the initial Voting System Standards with the 2002 Voting System Standards/Guidelines.
The national testing effort was overseen by NASED’s Voting Systems Board, which is composed of election officials and independent technical advisors. NASED established a process for vendors to submit their equipment to an Independent Test Authority (ITA) for evaluation against the Standards. The NASED has compiled a list of Qualified Voting Systems 12-22-05
[edit] EAC Interim Voting System Certification Program
The Help America Vote Act mandated the federal certification process be assumed by the EAC. The EAC implemented an interim certification program in July 2006 which provided a means to obtain federal certification for modifications required by state and local election officials administering the 2006 General Election.[7]
In summer 2006 the EAC barred the company Ciber Inc. from approving further voting machines. Federal officials found that it was not following its quality-control procedures and could not document that it was conducting all the required tests.[8] According to the EAC "Ciber, Inc. has applied for interim accreditation, but EAC has not completed its review, so the Ciber application is pending." They have released relevant documentation regarding the Ciber, Inc. application from accreditation.
[edit] See also
- Election Assistance Commission
- Electronic voting
- Help America Vote Act
- Independent verification systems
- National Institute of Standards and Technology
- National Software Reference Library
- Preventing Election fraud: Testing and certification of electronic voting
- Voting machine
[edit] References
- ^ a b EAC History of Voting System Certification and Test Laboratory Accreditation
- ^ 2005 Voluntary Voting System Guidelines Volume 1
- ^ Voluntary Voting System Guidelines, U.S. Election Assistance Commission
- ^ Roy G. Saltman. Final Project Report: Effective Use of Computing Technology in Vote-Tallying, prepared for the Clearinghouse on Election Administration (May 1975). URL= http://csrc.nist.gov/publications/nistpubs/NBS_SP_500-30.pdf
- ^ Saltman, R. G. 1988. Accuracy, integrity and security in computerized vote-tallying. Commun. ACM 31, 10 (Oct. 1988), 1184-1191. DOI= http://doi.acm.org/10.1145/63039.63041
- ^ Performance and Test Standards for Punchcard, Marksense, and Direct Recording Electronic Voting Systems, Federal Election Commission (1990)
- ^ EAC's Voting System Certification Program
- ^ U.S. Bars Lab From Testing Electronic Voting
