From Wikipedia, the free encyclopedia

When transplanting trees or shrubs from one location to another, digging the plant in preparation for moving it is typically the most challenging part of the job.

Anyone who grows trees and shrubs is likely at times to wish to move them. Transplanting involves digging the tree or shrub, moving it to its new location, and then replanting it. The most difficult of these steps, and the one which requires the most know-how, is digging. This article discusses digging up trees and shrubs to about 4” in trunk diameter.

For small plants – up to a trunk diameter of 1” or so – digging can be done with an ordinary garden spade. It is important to do it right, but the work is not difficult and the odds of success are very good. For trees or shrubs with a trunk diameter over 1” in diameter, and up to as much as about 4” in diameter, there are good options available which make it possible for even the home gardener to transplant successfully. Note, however, that size and weight of the required root ball, and the work involved in transplanting, increases rapidly as the trunk diameter increases. Moving trees with trunks over about 4” in diameter is likely to require heavy equipment and specialized expertise. The cost of transplanting increases rapidly as the size of the tree increases, although there is almost no limit to the size of trees which can be transplanted successfully if one is willing to pay the price.

Contents 1 Steps in Digging 2 Considerations 3 Digging Equipment 4 Notes 5 References 6 Equipment Manufacturers

[edit] Steps in Digging

Digging a tree or shrub in preparation for transplanting involves several steps. Various digging techniques can be employed, but no matter what approach is used, these steps must be attended to. The information covered here includes just the bare essentials. There are many factors which should be taken into account if one is to realize the best possible results. These considerations include the species of plant being moved and its condition, the soil conditions, climate, season of the year, and accessibility of the site.

1. Selecting the tree or shrub to transplant, and determining the size of the root ball to be dug. An approximate rule of thumb is to use a root ball 20 times the diameter of the trunk (as measured just above the basal flare) for trunks up to ½” in diameter, 18 times the diameter of the trunk for ½-1” diameter trunks, 16 times the trunk diameter for trunks 1-1½” in diameter, 14 times the trunk diameter for trunks 1½-2½” in diameter, and 12 times the trunk diameter for trunks 2½” to 4” in diameter. For most trees and shrubs, the root ball depth should be about 8” for a 12” diameter root ball, ranging up to about 18” for a 48” diameter root ball.
2. Cutting the root ball free from the surrounding soil so that it can be moved. This can be done in various ways. For small root balls (up to about 12-14” in diameter), an ordinary spade may be used to carefully slice the root ball free from the surrounding soil. The best spade for this purpose should be sturdily constructed, with a long, narrow blade cut square across at the tip. Such spades are sold commercially as “nursery spades”. Also available are the less sturdy “drain spades” - these have long, narrow blades which are usually rounded at the tip. Whatever type of spade is used, it is helpful to keep the cutting edge quite sharp. Keeping the blade clean and smooth helps also. Coating the blade with silicone lubricant or a similar product can help.
3. Stabilizing the root ball to help ensure that it stays intact during the transplanting process
4. Lifting the root ball out of the ground so that it may be transported to its new location.

Depending on the digging method used, steps 3 and 4 may be reversed.

[edit] Considerations

When transplanting any plant, preserving a significant fraction of the root system is necessary to maximize the chances of successfully re-establishing the plant in its new location. The practice of root pruning in preparation for transplanting can help concentrate the root system into a more confined area, thereby increasing the fraction of the root system that can be preserved.

In the case of trees and shrubs, the weight of a large root ball, and secondarily the weight of the tree itself, contribute significantly to the effort required to dig and move the plant.

[edit] Digging Equipment

Trees and shrubs of all sizes may be dug up using simple shovels.

Conventional earth moving equipment such as backhoes and front loaders are also used.

Some nurseries use tree spades,^[1] which are specialized powered equipment dedicated to digging up trees and shrubs.

A specialized tool for cutting roots may also be used, possibly in conjunction with a leverage-based manual system for lifting the root ball.^[2]

In the case of extremely large trees, these have at times been moved by equipment designed for moving missiles.

[edit] Notes

[edit] References

[edit] Equipment Manufacturers

• {{cite web | url = http://www.caretree.com | title = Caretree System's Tree Spades | accessdate = 2006-12-28
• Bobcat Tree Spade Attachment. Retrieved on December 28, 2006.
• Dutchman's Tree Spades. Retrieved on December 28, 2006.
• Holt Tree Spades. Retrieved on December 28, 2006.
• Lemar Tree Spades. Retrieved on December 28, 2006.
• Optimal Tree Spades. Retrieved on December 28, 2006.
• Tripple Brook Farm Tree Digging System. Retrieved on December 28, 2006.