AR-18

From Wikipedia, the free encyclopedia

Armalite AR-18
AR-18
Type	Assault Rifle
Place of origin	United States of America et al.
Production history
Manufacturer	Armalite (US), HOWA Machinery Co. (Japan), Sterling Armament Co. (UK)
Variants	AR-18S, AR-180, AR-180B
Specifications
Weight	3.17 kg (empty)
Length	73.6 cm (stock folded)/ 94cm
Barrel length	46.4cm

Cartridge	.223 Remington (5.56 mm)
Action	Gas, Piston, Rotating bolt
Rate of fire	800 rpm (cyclic)
Muzzle velocity	1000 m/s (3281 fps)
Feed system	20, 30, or 40 round box
Sights	iron or removable 3x scope

The AR-18 is an assault rifle chambered for 5.56 mm NATO ammunition. The AR-18 was designed by Arthur Miller, George Sullivan, and Charles Dorchester at ArmaLite in 1963 as an improved 5.56 mm caliber alternative to Armalite's previous AR-15 design, for which production rights had been sold to Colt. Armalite's interest in the design waned when the Colt AR-15 was selected for production by the US Army as the M16. Though never a commercial success, the basic operating mechanism of the AR-18 has proven to be quite adaptable, and has been used as the basis for many modern designs, including the SA80 currently in use by British defense forces.

1 History
2 Recent Developments
3 See also
4 External links

[edit] History

AR-18 stock folded

In 1955, the US Army was holding trials for a battle rifle to replace their outdated M1 Garands with a new weapon capable of fully automatic fire. The new weapon was intended to either fully or partially replace the M1 Carbine, Browning Automatic Rifle (BAR), and M3 Submachinegun as well. The US Army was against any reduction in power in their new weapon despite arguments that the full power round was not suitable for automatic fire and through their dominant position a slightly shorter version with similar power to their current rifle round became the standard 7.62 mm NATO round. Springfield Armory and Fabrique Nationale both entered designs based on fairly conventional engineering; the M14 was selected. This rifle replaced the Garand, but was essentially a product-improved M1 Garand.

Eugene Stoner's ArmaLite AR-10 came too late in the evaluation for serious consideration, but his advanced design was a dramatic improvement on conventional thinking. Using a number of advanced features and materials, the AR-10 was almost two pounds lighter than the M14 and offered much better control in full-automatic fire due to its novel "in-line" design.

Only two years later the Army was once again looking for a new rifle, this time based on a much smaller .22 caliber round; something more like the lighter M1 carbines. This time ArmaLite was invited to compete right from the start, and responded with a smaller version of the AR-10, the AR-15. Winchester Arms submitted a remake of a 'Carbine' Williams prototype carbine, and Springfield Armory was forbidden to participate as senior Ordnance Corps officials had not yet accepted the small-caliber, high-velocity concept.

In the end the Army selected the AR-15, as the M16, as their new standard rifle. This was not without further controversy, especially early reports of problems with the gas system fouling. Although these problems were later traced to changes in the ammunition and an almost complete lack of cleaning in the field, it was often used as evidence against the weapon itself. During the protracted acceptance trials (which took several years) Armalite had essentially given up, and sold the AR-15 production license to Colt.

After selling the design, ArmaLite began the development two new rifles based on a modified action that no longer used a "direct blowback" action and were thus immune to the fouling problems of the AR-15. The AR-16 was a 7.62 mm counterpart to the AR-18, and the AR-15 was the 5.56 mm counterpart to the AR-10. The design of the AR-18 is mainly credited to Armalite's chief designer at the time, Arthur Miller.

Overall, the new designs were much more conventional than previous Armalite designs.They were immediately criticized for their appearance. At the time, crude sheet metal and welded components were frowned upon in the use of service rifles. However, such construction proved to be a sign of things to come, as it promised significantly reduced production costs. Moreover, the gas piston operation of the AR-18 proved much more resistant to fouling than that of the earlier AR-15 and M16 rifles.

Key to the cost reduction was the use of stamped-metal receivers and other components, as opposed to the AR-10/15's forged aluminum receiver. In addition a simpler operating system with a conventional short-stroke gas piston was selected in place of the lightweight direct gas tube and cutoff used in the earlier AR-15, intended to address complaints about reliability and fouling. The bolt, springs and recoil buffer were housed within the receiver, and the bolt rode on two metal rods instead of the receiver walls, which provided additional clearance for dust and mud. Compared to the AR-15, which housed its buffer mechanism in the buttstock, the AR-18's compact design enabled the use of a folding stock with a hinging mechanism (that later proved to be less than adequately rigid).

Armalite's AR-16 design never progressed beyond prototype stage, but the AR-18 was put into limited production, and underwent testing as an alternative to the AR-15. Unfortunately, at this point the AR-15/M16 rifle had been fully developed, flaws had been ironed out in successive modifications, and the U.S. military was not interested in acquiring yet another 5.56 mm service rifle. A semi-automatic version of the AR-18 design known as the AR-180 was later produced for the civilian market between 1969 and 1972 at Armalite's Costa Mesa manufacturing plant. The Costa Mesa AR-180s were one of the first military-type semi-automatic rifles to become widely available in the USA. Howa, of Japan, continued production of the AR-18/AR-180 from 1972 until 1974, and Sterling in the UK produced the AR-18/AR-180 from 1976 to the mid-1980s.

Many of the American-made rifles were purchased by IRA sympathizers, and found their way into the hands of the Provisional IRA, where the rifle was known as the "widowmaker" (see also Provisional IRA arms importation). The Armalite rifle was for many years the most lethal weapon available to the PIRA. For this reason it become an iconic symbol within that movement. The republican ballad Little Armalite tells of how the AR-18 changed the fortunes of Republicans in their confrontation with British state forces. The 1980s Republican political strategy of parallel politcal and paramilitary campaigns was also christened the "Armalite and ballot box strategy".

Unlike the AR-15/M16, the AR-18 did not see substantial improvement, and was not adopted in large numbers by any military service. In the end, the commercial failure of the AR-18 was not due to any significant flaws in its basic design, but in the lack of marketing efforts by Armalite. In 1968, dissatisfied with the way Armalite had marketed the AR-18, Arthur Miller left Armalite.

[edit] Recent Developments

The ArmaLite brand was purchased in 1996 by Eagle Arms, a small US arms manufacturer, who adopted the Armalite brand for their company. An updated model of the AR-180 was introduced in 2001 as the AR-180B, with a molded polymer receiver replacing the stamped steel original. The polymer construction is designed to make the receiver walls more rigid than the original stamped metal version, as well as lighter in weight. A version with a Picatinny rail is planned for production.