Inline skates

From Wikipedia, the free encyclopedia

Bont ZX2 inline speed skates

Inline skates are a type of roller skate, used for inline skating. Unlike quad skates which have a configuration of 2 wheels in the front and 2 wheels in the back, inline skates have two, three, four or five wheels arranged in a single line. Some inline skates have a "stop" or "brake" which is used to slow down while skating; most inline skates have a heel stop rather than the toe stop, particularly indispensable for Inline Figure Skating.

The earliest roller skates were of the inline design, but these were later superseded by quad skates, the design of which made skating curved edges easier. During the late 1980s and early 1990s, the popularity of inline skates had a strong resurgence, led by the company Rollerblade, Inc. founded by Scott and Brennan Olson in Minneapolis, Minnesota. After the brothers sold the company in about 1984, Rollerblade promoted and popularized inlines, and their skates became so successful that the term "Rollerblades" has become synonymous with "inline skates."^[1] Many people call any form of skating "Rollerblading," although this is an unauthorized use of a genericized trademark.

1 Parts
2 Notes
3 External links

[edit] Parts

A skate is composed of a boot, which is worn on the foot. To the boot is attached a frame, which holds the wheels in place. Bearings allow the wheels to rotate freely around an axle.

An inline skate designed for artistic roller skating

There are different types of inline skates for different types of skating such as aggressive skating, speed skating, and artistic inline skating. Those differ in the boots, frames and wheels that are used.

[edit] The boot

For most skating a high boot is used, which provides more ankle support and is easier to skate in, particularly for beginners. Speed skaters often use lower boots allowing more ankle flexion.

For recreational skating a soft boot is used for greater comfort, but many other disciplines prefer a harder boot, either to protect the foot against impact or for better control of the skate. The boot may also contain shock absorbent padding for comfort.

Most aggressive skates use a hard boot or a hard/soft boot for increased support.

[edit] The frame

The frame and wheels of an inline skate.

Typical recreational skates use frames built out of high-grade polyurethane (plastic). Low-end department or toy store skate frames may be composed of other types of plastic. Speed skate frames are usually built out of carbon fibre or extruded aluminum (more expensive but more solid), magnesium, or even pressed aluminum, which is then folded into a frame (cheaper but less sturdy).

Carbon fibre frames are expensive but more flexible, making for a smoother ride at the expense of worse power transfer between the leg and the wheels. In general, carbon fibre frames weigh about 160-180 grams. Aluminum can weigh from 170 to 220 grams. Frame length ranges from around 230 mm for short-framed four wheel skates (used for example in inline hockey), up to about 325 mm for a five wheel racing frame.

[edit] Bearings

Axles, bearings and spacers.

Ball bearings allow the wheels to rotate freely and smoothly. Bearings are usually rated on the ABEC scale, a measure of the manufactured precision tolerance, ranging from 1 (worst) to 9 (best) in odd numbers. The ABEC standards were originally intended for high-speed machinery, not skating applications. While higher rated bearings are generally better in overall quality, whether they automatically translate to more speed is still questionable. The quality of the steel used is also very important, but is not rated by the ABEC scale. In any case, the general opinion is that if one has the money or inclination, higher ABECs certainly can't hurt. ILQ Scale, is another measure scale, which tries to solve the material issue by considering precision tolerance, design feature, lubrication and materials quality. But beginners should, if possible, use the lower scale bearings. The lower ABEC scale bearings exchange speed for better control and a smoother ride. Note that bearings alone won't make up for poor technique or lack of fitness.

The vast majority of skate bearings on the market are produced in China, and tend to be of much lower quality and durability than bearings produced in Japan, Germany, Switzerland, Canada, or the USA. Newer bearings on the market now use ceramic ball bearings instead of steel. The merits of ceramic versus steel are probably still to be determined as well.

[edit] Wheels

Diagram of inline skate wheels with different diameter and profile.

Wheel sizes vary depending on the skating style:

48-60 mm for aggressive skating.
68-72 mm for artistic inline skating.
72-80 mm for general recreational skating.
59-80 mm for roller hockey skating and slalom.
80-110 mm for speed skating.

In general the bigger the wheel, the faster the skate. However, large wheels take more energy to start rolling. Smaller wheels allow faster acceleration, maneuverability, and a lower center of gravity. Wheel hardness is measured on the A scale (see Durometer) and usually ranges between 78A-93A (higher numbers are harder). Harder wheels are faster and more durable, but soft wheels may have better grip (grip is determined by many factors, and wheel manufacture is arguably more important than durometer) and less affected by road bumps. Wheel profiles and thicknesses again vary by application. Elliptic profiles minimise friction for a faster ride; more rounded profiles have better grip and are more stable.