Passive differentiator circuit

From Wikipedia, the free encyclopedia

This article or section does not adequately cite its references or sources.
Please help improve this article by adding citations to reliable sources. (help, get involved!)
This article has been tagged since December 2006.

Circuit 1

Circuit 2

Passive differentiator circuit is a simple quadripole consisting of two passive elements. It is also the simplest (first-order) high-pass filter.

We'll analyze only the first circuit, the second is absolutely similar.

1 Transfer function
2 Impulse response
3 Applications
4 See also

[edit] Transfer function

A transfer ratio is a gain factor for the sinusoidal input signal with given frequency.

A transfer function shows the dependence of the transfer ratio from the signal frequency, given that the input signal is sinusoidal.

According to Ohm's law,

$Y=X\frac{Z_R}{Z_R+Z_C}=X\frac{R}{R+\frac{1}{j \omega C}}=X\frac{1}{1+\frac{1}{j \omega RC}},$

where $X$ and $Y$ are input and output signals' amplitudes respectively, and $Z R$ and $Z C$ are the resistor's and capacitor's impedances.
Therefore, the complex transfer function is

$K(j \omega)=\frac{1}{1+\frac{1}{j \omega RC}}=\frac{1}{1+\frac{\omega_0}{j \omega}},$

where

$\omega_0=\frac{1}{RC}.$

Amplitude transfer function

$H(\omega)=|K(j \omega)|=\frac{1}{\sqrt{1+\left(\frac{\omega_0}{\omega}\right)^2}}.$

Phase transfer function

$\phi (\omega)=\arg K(j \omega)=\arctan \frac{\omega_0}{\omega}.$

Amplitude and phase transfer functions for a passive differentiator circuit

Transfer functions for the second circuit are the same (with $\omega_0=\frac{R}{L}$ ).

[edit] Impulse response

The circuit's Impulse response can be derived as an inverse Laplace transform of the complex transfer function:

$h(t)=\mathcal{L}^{-1} \left \{K(p) \right \}=\delta (t)-\omega_0 e^{-\omega_0 t}=\delta (t)-\frac{1}{\tau} e^{-\frac{t}{\tau}}$

where $\tau=\frac{1}{\omega_0}$ is a time constant, and $δ(t)$ is a Dirac delta function

An impulse response of a passive differentiator circuit

[edit] Applications

A passive differentiator circuit is one of the basic electronic circuits, being widely used in circuit analysis based on the equivalent circuit method.