Port mirroring
From Wikipedia, the free encyclopedia
Port mirroring is used on a network switch to send a copy of all network packets seen on one switch port to a network monitoring connection on another switch port. This is commonly used for network applicances that require monitoring of network traffic, such as an intrusion-detection system. Port mirroring on a Cisco Systems switch is generally referred to as Switched Port Analyzer (SPAN); some other vendors have other names for it, such as Roving Analysis Port (RAP) on 3Com switches.
An example of a SPAN configuration on a Cisco 2950 Switch is below.
Monitor session 1 source interface fastethernet 0/1, 0/2, 0/3 Monitor session 1 destination interface fastethernet 0/4 encap ingress vlan 1
The above example mirrors data from ports 0/1, 0/2 and 0/3 to the destination port 0/4 using vlan1 for vlan tagging.
To show the status of a SPAN monitor session use the following command.
show monitor 1
Where 1 is the session number from the above statement.
[edit] External links
- SwitchReference page on the Wireshark Wiki, giving information on port mirroring on various switches
 |
This computer hardware-related article is a stub. You can help Wikipedia by expanding it. |
