Rabbet
From Wikipedia, the free encyclopedia
A rabbet (also known as rebate) is a recess or groove cut into the edge of a piece of machineable material, usually wood. When viewed in cross-section, a rabbet is two-sided and open to the edge or end of the surface into which it is cut.
The spelling rabbet is probably a derivation of rebate, the latter being more common outside of North America.
An example of the use of a rabbet is in a glazing bar where it makes provision for the insertion of the pane of glass and putty. It may also accommodate the edge of the back panel of a cabinet. It is also used in door and casement window jambs.
[edit] Methods
A rabbet can be cut by the following methods:
- Electric router using a straight or rebate bit
- Rebate plane or a shoulder plane
- Circular saw with multiple passes (depending on width and depth)
- Dado set in a single pass
- Spindle moulder
- Hand saw and chisel
