Rydalmere railway station, Sydney
From Wikipedia, the free encyclopedia
Rydalmere
|
|
|---|---|
 |
|
| Carlingford Line | |
| Station code | RYD |
| Suburb | Rydalmere |
| Street(s) | Brodie St |
| Distance from Central Station | 24.01 km |
| Station Altitude (above sea level) | ? m |
| Types of stopping trains | Suburban all stops |
| Number of platforms | 1 |
| Number of tracks | 1 |
| Platform arrangement | 1 Side |
| Type of station | Ground |
| Ticket barriers | No |
| Transfers available | Bus |
| Disabled access | Yes (Assisted) |
| Station facilities | Link |
Rydalmere railway station is situated in a suburb in Sydney's north western suburbs on the Carlingford Line. This station is not heavily used. Most patrons are local residents, workers from the industrial area and the University of Western Sydney's Parramatta Campus. The station has a single platform of 4-cars length on a single track line. To reach the other side of the line, pedestrians need to utilise the footpath on the Victoria Rd bridge, which has stairs at either end.
[edit] Service
Because of the limitations of the single line section, the train service at its most frequent intervals is only about one train every 38 minutes. At off peak times, a clockface timetable of one train per hour applies. Most trains connect with western line trains at Clyde.
[edit] Clearways project
Under the clearways project, part of the single line will be duplicated, to allow 2 trains per hour to operate.
[edit] Trackplan
| Preceding Station (inbound) |
Line | Following Station (outbound) |
|
|
|
|
 |
This Australian rail-related article is a stub. You can help Wikipedia by expanding it. |
