Specular highlight
From Wikipedia, the free encyclopedia
A specular highlight is the bright spot of light that appears on shiny objects when illuminated (for example, see image at right). Specular highlights are important in 3D computer graphics, as they provide a strong visual cue for the shape of an object and its location with respect to light sources in the scene.
Contents |
[edit] Microfacets
The term specular means that light is perfectly reflected in a mirror-like way from the light source to the viewer. Specular reflection is visible only where the surface normal is oriented precisely halfway between the direction of incoming light and the direction of the viewer; this is called the half-angle direction because it bisects (divides into halves) the angle between the incoming light and the viewer. Thus, a specularly reflecting surface would show a specular highlight as the perfectly sharp reflected image of a light source. However, many shiny objects show blurred specular highlights.
This can be explained by the existence of microfacets. We assume that surfaces that are not perfectly smooth are composed of many very tiny facets, each of which is a perfect specular reflector. These microfacets have normals that are distributed about the normal of the approximating smooth surface. The degree to which microfacet normals differ from the smooth surface normal is determined by the roughness of the surface.
The reason for blurred specular highlights is now clear. At points on the object where the smooth normal is close to the half-angle direction, many of the microfacets point in the half-angle direction and so the specular highlight is bright. As one moves away from the center of the highlight, the smooth normal and the half-angle direction get farther apart; the number of microfacets oriented in the half-angle direction falls, and so the intensity of the highlight falls off to zero.
The specular highlight often reflects the color of the light source, not the color of the reflecting object. This is because many materials have a thin layer of clear material above the surface of the pigmented material. For example plastic is made up of tiny beads of color suspended in a clear polymer and human skin often has a thin layer of oil or sweat above the pigmented cells. Such materials will show specular highlights in which all parts of the color spectrum are reflected equally. On metallic materials such as gold the color of the specular highlight will reflect the color of the material.
[edit] Models of microfacets
A number of different models exist to predict the distribution of microfacets. Most assume that the microfacet normals are distributed evenly around the normal; these models are called isotropic. If microfacets are distributed with a preference for a certain direction along the surface, the distribution is anisotropic.
[edit] Phong distribution
In the Phong reflection model, the intensity of the specular highlight is calculated as kspec = cosn(R,V), where R is the mirror reflection of the light vector off the surface, and V is the viewpoint vector.
In the Blinn–Phong shading model, the intensity of a specular highlight is calculated as kspec = cosn(N,H), where N is the smooth surface normal and H is the half-angle direction (the direction vector midway between L, the vector to the light, and V, the viewpoint vector).
The number n is called the Phong exponent, and is a user-chosen value that controls the apparent smoothness of the surface. These equations imply that the distribution of microfacet normals is an approximately Gaussian distribution, or approximately Pearson type II distribution, of the corresponding angle.[1] While this is a useful heuristic and produces believable results, it is not a physically based model.
[edit] Gaussian distribution
A slightly better model of microfacet distribution can be created using a Gaussian distribution. The usual function calculates specular highlight intensity as:
where m is a constant between 0 and 1 that controls the apparent smoothness of the surface.
- Material from this section adapted from: Glassner, Andrew S. (ed). An Introduction to Ray Tracing. San Diego: Academic Press Ltd, 1989. p. 148.
[edit] Beckmann distribution
A physically based model of microfacet distribution is the Beckmann distribution. This function gives very accurate results, but is also rather expensive to compute.
where m is the average slope of the surface microfacets.
- Material from this section adapted from: Foley et al. Computer Graphics: Principles and Practice. Menlo Park: Addison-Wesley, 1990. p. 764.
[edit] Heidrich-Seidel anisotropic distribution
The Heidrich-Seidel distribution is a simple anisotropic distribution, based on the Phong model. It can be used to model surfaces that have small parallel grooves or fibers, such as brushed metal, satin, and hair. The specular highlight intensity for this distribution is:
![k_{spec} = \left [ \sin(L, T) \sin(V, T) - \cos(L, T) \cos(V, T) \right ] ^n](../../../math/c/6/b/c6b52e532b3bef85a7c0725e212e787a.png)
where n is the Phong exponent, V is the viewing direction, L is the direction of incoming light, and T is the direction parallel to the grooves or fibers at this point on the surface.
[edit] Ward anisotropic distribution
The Ward anisotropic distribution[1] uses two user-controllable parameters αx and αy to control the anisotropy. If the two parameters are equal, then an isotropic highlight results. The specular term in the distribution is:
![k_{spec} = \frac{1}{\sqrt{(N\cdot L)(N \cdot V)}}\frac{N\cdot L}{4\alpha_x\alpha_y} \exp \left[ -2 \frac{\left(\frac{H\cdot X}{\alpha_x}\right)^2+\left(\frac{H\cdot Y}{\alpha_y}\right)^2}{1+(H\cdot N)} \right]](../../../math/6/5/b/65b03c1999cfbbdf402e7ecc06dc6a3c.png)
The specular term is zero if N·L < 0 or N·E < 0. All vectors are unit vectors. The vector V is the vector from the surface point to the eye, L is the direction from the surface point to the light, H is the half-angle direction, N is the surface normal, and X and Y are two orthogonal vectors in the normal plane which specify the anisotropic directions.
[edit] Cook–Torrance model
The Cook–Torrance model uses a specular term of the form 
. Here D is the Beckmann distribution factor, 
and F is the Fresnel term, F = (1.0 + E.N)λ. G is the Geometric attenuation term, describing selfshadowing due to the microfacets, and is of the form 
. In these formulas E is the vector to the camera or eye, H is the half-angle vector, L is the vector to the light source and N is the normal vector, and α is the angle between H and N.
[edit] Using multiple distributions
If desired, different distributions (usually, using the same distribution function with different values of m or n) can be combined using a weighted average. This is useful for modelling, for example, surfaces that have small smooth and rough patches rather than uniform roughness.
[edit] References
- ^ Richard Lyon, "Phong Shading Reformulation for Hardware Renderer Simplification", Apple Technical Report #43, Apple Computer, Inc. 1993 PDF
