Harmonics (music)
From Simple English Wikipedia, the free encyclopedia
Harmonics in music are notes which are produced in a special way. They are notes which are produced as part of the “harmonic series”.
In physics a harmonic is a wave which is added to the basic fundamental wave. In this article we are talking about sound waves, and we can understand it clearly by looking at the strings of a musical instrument.
When a violinist plays a note on a violin string the string starts to vibrate very fast. This vibration makes the air vibrate and the sound waves travel to our ear so that we can hear it. If the note was absolutely pure the string would move like a sine wave. Sine waves can only be made electronically and they sound very boring to us. The note played on the violin string makes the string vibrate in a very complicated way. There is the basic note (the fundamental), but added to that are lots of other little notes that all add up to a sound in a special way that tells us that it is a violin playing and not a clarinet or a human voice.
The higher the note the faster the string vibrates. An A above middle C (the violinist’s A string) vibrates at 440Hz (440 times per second). This is the “fundamental” or “first harmonic”. The second harmonic is vibrating twice as fast (ratio 2:1): 880Hz. This gives an A an octave higher. The third harmonic will give a ratio 3:2. This will be an E (an octave and a fifth above the fundamental). The higher the harmonic the quieter it is, but the ratio is always a whole number (not a fraction).
Every note that we hear on an instrument is really a combination of several notes or “harmonics”, even although we may not realize that we are hearing more than one note at a time. Play the lowest C on the piano. Now find the next C which is an octave higher. Press this key very slowly so that it does not sound and hold it down. While you hold it down play the bottom C again making it loud and very short. You will hear the C you are holding. This is because the strings of the C you are holding are vibrating a little because it is a harmonic of the low C (they can vibrate because the damper is off the string while you are holding the note down). You can do the same holding the next G down, then the next C, then the E. As you get higher the harmonics become fainter (quieter). The musical example below shows the notes of a harmonic series in musical notation.
If you want to hear the notes of a harmonic series click here: clicking here.
[edit] Playing harmonics on instruments
Musicians sometimes need to play harmonics on their instruments. In musical notation this is shown by placing a little circle above the note.
A violinist can place his finger very lightly on a string so that it divides the string into half. He will hear a harmonic (the note an octave higher than the open string). By placing his fingers in other places he can get more harmonics, e.g by touching the string a quarter of the way down he gets the next harmonic. “Artificial harmonics” can be played by stopping a string with the finger in the usual way (so that the string is now shorter) and placing the little finger further up the string to get a harmonic of the stopped note. Artificial harmonics are written with diamond-shaped note heads. They are very hard to play well.
Harpists can play harmonics with their left hand by stopping the string with the side of the hand (near the little finger) and plucking with the thumb or finger. They can play harmonics with the right hand by stopping the string with the upper knuckle of the second finger and plucking with the thumb. Harmonics on the harp sound very beautiful.
Players of woodwind and brass instruments play many of their notes by blowing slightly stronger (overblowing) to get a higher series of notes. Instruments such as the recorder can play chords by making several harmonics sound together, but this is extremely difficult to do well and only found in modern music for virtuoso players.
