Toyota E engine
From Wikipedia, the free encyclopedia
The Toyota E engine family is a straight-4 piston engine series, utilizing a timing belt rather than a chain. Like many of Toyota's other engine designs, the E engine series features a cast iron block, along with an aluminum cylinder head. The members of the E engine family, range from 1.0 L to 1.5 L. The E family supplanted the K engines in most applications..
Contents |
[edit] 1E
The 1E is a 1.0L (999 cc) carbureted 12 valve SOHC engine. Bore was : 70.5 mm and stroke was : 64.0 mm. Compression Ratio was 9.0:1 It appeared in 1985. Output ranged at about 55 hp at 6000 RPM. And torque was 75 lb ft @ 3500 RPM . These engines aren't quite known for power or performance, but instead they're know for fuel economy.
- Specs:
- Bore x Stroke : 70.5mm x 64.0mm
- Displacement : 999cc
- Valve clearance: Intake: 0.20mm Exhaust: 0.20mm
- Ignition timing (with vacuum advancer off): 10 degrees BTDC
- Oil capacity: 3.2l
- Maximum allowable speeds in gears:
- 1st Gear : 45 km/h (28mph)
- 2nd Gear : 83 km/h (52mph)
- 3rd Gear :120 km/h (75mph)
- 4th Gear : Vehicle Top Speed (around 150 km/h)
- Gearbox :
- 4-speed manual gearbox : C140
- Automatic transmission : ***
Applications:
- Toyota Starlet EP70, EP80
[edit] 2E
The 2E is a 1.3 L SOHC version. Output ranged from 65 hp to 82 hp at 6000 RPM with 72 ft·lbf of torque at 3600 RPM to 77 ft·lbf of torque at 5200 RPM. It appeared in 1985, and was discontinued after 1990. The 2E engines appeared in both carbureted and fuel-injected versions. The 2E-TE, appearing in 1986, was a turbocharged engine producing 101 hp. A later version, the 2E-TELU produced 110 hp.
- Specs:
- Bore x Stroke : 73.0mm x 77.4mm
- Displacement : 1295cc (late models had 1296cc)
- Ignition Timing (with vacuum advancer off): 5 degrees BTDC
- Maximum allowable speed in gears (non turbo):
- 1st Gear : 49 km/h (30mph)
- 2nd Gear : 91 km/h (57mph)
- 3rd Gear :132 km/h (82mph)
- Gearbox :
- 5-speed manual gearbox: C150
- Automatic Transmission: ***
Applications:
- Toyota Corolla
- Toyota Starlet EP71, EP81, EP90
- Toyota Corsa
- Toyota Tazz (South Africa Only)
- Toyota Tercel (Caribbean/South America)
[edit] 3E
The 3E is a 1.5 L (1456 cc) SOHC version. Output ranged from 78 hp to 87 hp at 6000 RPM with 87 ft·lbf of torque at 4000 RPM to 89 ft·lbf of torque at 4800 RPM. It appeared in 1986, and was discontinued after 1994. The 3E engines appeared in both carbureted and fuel-injected applications. The 3E-TE, appearing in 1986, was a turbocharged engine producing 113 hp at 5600 RPM with 127 ft·lbf of torque at 3200 RPM.
Applications:
- Toyota Tercel
- Toyota Corolla II
- Toyota Starlet(EP71)
Reliability: The '3E' and '3E-E' engines are considered slightly less reliable than other Toyota engines. The most common problems to effect these engines are carbon buildup in the intake valves and premature valve stem seal (nitrile) failure and collapse of the oil control ring on the piston. This allows oil to enter the combustion chamber causing rough idling, stalling and fouled plugs. Though more recent consumer complaints have arose on the 5e engines having a similar problem. The best fix, is to replace the worn nitrile seals with slightly more expensive silicone or viton which have shown to last much longer. More information about these problems can be found on the [Tercel online message board]
[edit] 4E
The 4E is a 1.3 L (1331 cc) DOHC version. Bore was 74mm and stroke 77.4mm. Output ranged from 81 hp at 6400 RPM to 99 hp at 6600 RPM with 81 ft·lbf of torque at 3600 RPM to 6 ft·lbf of torque at 5200 RPM. It appeared in 1989, and was discontinued after 1998. The 4E engines appeared in fuel-injected applications. The 4E-FTE, appearing in 1989, was a turbocharged engine producing 135 hp at 6400 RPM with 116 ft·lbf of torque at 4800 RPM. Specs:73mm Bore Applications:
- Toyota Starlet EP70, EP76, EP81, EP82, EP85, EP91, EP95
- Toyota Tercel
- Toyota Corolla
[edit] 5E
The 5E is a 1.5 L (1497 cc) DOHC version. Output ranged from 94 hp at 5400 RPM to 110 hp at 6400 RPM with 91 ft·lbf of torque at 3200 RPM to 100 ft·lbf of torque at 4000 RPM. It appeared in 1991, and was discontinued after 1998. All 5E engines were fuel-injected.
Applications:
[edit] E Series Specs
| Engine Code | Head Design | Valves/Cylinder | Date | CC | Peak HP | Peak Torque | Bore | Stroke | CR | |
| 1E | SOHC | 3 | 85-94 | 999 | 55@6000 | 75@3800 | 70.5 | 64.0 | 9.0:1 | |
| 2E* | SOHC | 84 | 1295 | 65@6000 | 72@3800 | |||||
| 2E | SOHC | 3 | 85- | 1295* | 82@6000 | 77@5200 | 73 | 77.4 | 9.3:1 | |
| 2E | SOHC | 3 | 85 | 1295 | 74@6200 | 76@4200 | 73 | 77.4 | ||
| 2E-LU | SOHC | 3 | 86-90+ | 1295 | 66@6000 | 72@3600 | 73 | 77.4 | ||
| 2E-E | SOHC | 3 | 85- | 1295 | 81@6000 | 77@5200 | 73 | 77.4 | 9.5:1 | |
| 2E-TE | SOHC | 3 | 86- | 1295 | (~101-108) | 73 | 77.4 | |||
| 3E | SOHC | 3 | 86- | 1456 | 78@6000 | 87@4000 | 2.87 | 3.43 | 9.3:1 | |
| 3E-E | SOHC | 3 | 88- | 1456* | 87@6000 | 89@4800 | 73 | 87 | 9.3:1 | |
| 3E-E | SOHC | 3 | 91-94 | 1457 | 82@5200 | 89@4400 | 73 | 87 | 9.3:1 | |
| 3E-TE | SOHC | 3 | 86- | 1456* | 113@5600 | 127@3200 | 2.87 | 3.43 | 8.0:1 | |
| 4E-F | DOHC | 4/25 | 89- | 1331* | 81@6400 | 81@3600 | 74 | 77.4 | 9.6:1 | |
| 4E-FE | DOHC | 4/25 | 89- | 1331* | 99@6600 | 86@5200 | 74 | 77.4 | 9.6:1 | |
| 4E-FE | DOHC | 4/25 | 97 | 1331 | 88@5600 | 85@4600 | 74 | 77.4 | 9.6:1 | JP Cynos |
| 4E-FE | DOHC | 4/25 | 97-98 | 1331 | 85@5500 | 87@4400 | 74 | 77.4 | 9.6:1 | JP Starlet |
| 4E-FE | DOHC | 4/25 | 97 | 1331 | 82@5500 | 85@4400 | 74 | 77.4 | 9.6:1 | JP Starlet |
| 4E-FTE | DOHC | 4/25 | 89- | 1331* | 133@6400 | 116@4800 | 74 | 77.4 | 8.2:1 | |
| 4E-FTE | DOHC | 4/25 | 98 | 1331 | 135@6400 | 116@4800 | 74 | 77.4 | 8.2:1 | |
| 5E-FE | DOHC | 4/25 | 91-95 | 1497 | 100@6400 | 91@3200 | 74 | 87 | 9.4:1 | |
| 5E-FE | DOHC | 4/25 | 95-98 | 1497 | 94@5400 | 100@3400 | 74 | 87 | 9.8:1 | Japan Starlet |
| 5E-FHE | DOHC | 95- | 1496 | 110@6400 | 98@5200 | 74 | 87 | |||
| 5E-FHE | DOHC | 1496 | 105@6600 | 100@4000 | 74 | 87 | 9.8:1 | |||
| 5E-FHE | DOHC | 97-98 | 1496 | 110@6400 | 100@4000 | 74 | 87 | 9.8: |
