Burn (injury)

From Wikipedia, the free encyclopedia

This article describes a type of injury. For other meanings of the word, see burn.

In medicine, a burn is a type of injury to the skin caused by heat, cold, electricity, chemicals, or radiation (e.g. a sunburn).

Contents 1 Classification 2 First Aid 3 Scald 4 Cold burn 5 Assessing burns 6 Management 7 Treatment of low-grade burns 8 See also 9 References

[edit] Classification

In classical medical literature, there were six degrees, the first three of which are still commonly used by the public:

• First-degree burns are usually limited to redness (erythema), a white plaque and minor pain at the site of injury. These burns usually extend only into the epidermis.
• Second-degree burns additionally fill with clear fluid, have superficial blistering of the skin, and can involve more or less pain depending on the level of nerve involvement. Second-degree burns involve the superficial (papillary) dermis and may also involve the deep (reticular) dermis layer.

Evolution of a 2nd degree burn — One hour

Evolution of a 2nd degree burn — One day

Evolution of a 2nd degree burn — two days, the blister is appearing

• Third-degree burns additionally have charring of the skin, and produce hard, leather-like eschars. An eschar is a scab that has separated from the unaffected part of the body. Frequently, there is also purple fluid. These types of burns are often painless because nerve endings have been destroyed in the involved areas.

Burns that injure the tissues underlying the skin, such as the muscles or bones, are sometimes categorized as fourth-degree burns. These burns are additionally broken down into three additional degrees: fourth-degree burns result in the skin being irretrievably lost, fifth-degree burns result in muscle being irretrievably lost, and sixth-degree burns result in bone being charred.

A newer classification of "Superficial Thickness", "Partial Thickness" (which is divided into superficial and deep categories) and "Full Thickness" relates more precisely to the epidermis, dermis and subcutaneous layers of skin and is used to guide treatment and predict outcome.

Table 1. A description of the traditional and current classifications of burns.

Nomenclature	Traditional nomenclature	Depth	Clinical findings
Superficial thickness	First-degree	Epidermis involvement	Erythema, minor pain, lack of blisters
Partial thickness — superficial	Second-degree	Superficial (papillary) dermis	Blisters, clear fluid, and pain
Partial thickness — deep	Second-degree	Deep (reticular) dermis	Whiter appearance, with decreased pain. Difficult to distinguish from full thickness
Full thickness	Third- or fourth-degree	Dermis and underlying tissue and possibly fascia, bone, or muscle	Hard, leather-like eschar, purple fluid, no sensation (insensate)

Serious burns, especially if they cover large areas of the body, can cause death; any hint of burn injury to the lungs (e.g. through smoke inhalation) is a medical emergency.

Chemical burns are usually caused by chemical compounds, such as sodium hydroxide (lye), silver nitrate, and more serious compounds (such as sulfuric acid). Most chemicals (but not all) that can cause moderate to severe chemical burns are strong acids or bases. Nitric acid, as an oxidizer, is possibly one of the worst burn-causing chemicals. Hydrofluoric acid can eat down to the bone and its burns are often not immediately evident. Most chemicals that can cause moderate to severe chemical burns are called caustic.

Electrical burns are generally symptoms of electric shock, being struck by lightning, being defibrillated or cardioverted without conductive gel, etc. The internal injuries sustained may be disproportionate to the size of the "burns" seen - as these are only the entry and exit wounds of the electrical current.

Survival and outcome (scars, contractures, complications) of severe burn injuries is remarkably improved if the patient is treated in a specialized burn center/unit rather than a hospital.

[edit] First Aid

• Treating a burn begins with stopping the burning process. Immerse the burned area in cool water until pain is relieved. If this is not possible, pour cool water over the burn, and apply a cloth soaked in water. Remove nearby jewelry and loosen tight clothing before any swelling occurs.

• For chemical burns, immediately flush the affected area with cool water for 15 to 20 minutes. Remove any contaminated clothing, and brush away any dry powder if applicable (do not use bare hands.)

• For electrical burns, turn off the electrical current, or remove the casualty from the electrical source if safe to do so. Check for breathing and circulation, and give artificial respiration or CPR as necessary.

• Assess the severity of the burn (described below). The following situations require medical assistance:
  • Any burn to the face, hands, feet, or genitalia.
  • Any deep burn, or any burn that covers a large area.
  • Any burn that can interfere with respiration.
  • Any burn to an infant or elderly person.
  • Any chemical or electrical burn.

• Cover the burn loosely with a clean cloth, and secure the dressing. Make sure that any tapes used do not touch the burned area.

• With larger burns the body has the potential to lose a large amount of fluid, in this case every effort should be made to avoid the patient going into shock. Do not provide fluid when you suspect shock as this may induce vomiting making the problem worse. 'Shock' is an extremely serious condition and can very easily result in the death of the patient, thus medical assistance is imperative. When shock occurs, the best course of action is to lie the patient down and, if required, raise the legs above the height of the body.

[edit] Scald

Scalding is a specific type of burning that is caused by hot fluids or gasses. Examples of common liquids that cause scalds are water and cooking oil. Steam is a common gas that causes scalds. The injury is usually regional and usually does not cause death. More damage can be caused if hot liquids enter an orifice. However, deaths have occurred in more unusual circumstances, such as when people have accidentally broken a steam pipe. Young children, with their delicate skin, can suffer a serious burn in a much shorter time of exposure than the average adult.

Table 2. Scald Time (Hot Water)

Temperature	Max duration until injury
155F (68.3C)	1 second
145F (62.9C)	3 seconds
135F (57.2C)	10 seconds
130F (54.4C)	30 seconds
125F (51.6C)	2 minutes
120F (48.8C)	5 minutes

[edit] Cold burn

A cold burn (see frostbite) is a kind of burn which arises when the skin is in contact with a low-temperature body. They can be caused by prolonged contact with moderately cold bodies (snow for instance) or brief contact with very cold bodies such as dry ice, liquid helium, liquid nitrogen, or canned air, all of which can be used in the process of wart removal. In such a case, the heat transfers from the skin and organs to the external cold body (as opposed to most other situations where the body causing the burn is hotter, and transfers the heat into the skin and organs). The effects are very similar to a "regular" burn. The remedy is also the same as for any burn: for a small wound keep the injured organ under a flow of comfortably temperatured water; the heat will then transfer slowly from the water to the organs and help the wound. Further treatment or treatment of more extended wound also as usual.

[edit] Assessing burns

Main article: Total body surface area

Burns are assessed in terms of total body surface area (TBSA), which is the percentage affected by partial thickness or full thickness burns (superficial thickness burns are not counted). The rule of nines is used as a quick and useful way to estimate the affected TBSA.

Table 3. Rule of nines for assessment of total body surface area affected by a burn - Adult Anatomic structure Surface area Head 9% Anterior Torso 18% Posterior Torso 18% Each Leg 18% Each Arm 9% Perineum 1%

Table 4. Rule of nines for assessment of total body surface area affected by a burn - Infant Anatomic structure Surface area Head 18% Anterior Torso 18% Posterior Torso 18% Each Leg 14% Each Arm 9% Perineum 1%

[edit] Management

The first step in managing a person with a burn is to stop the burning process. With dry powder burns, the powder should be brushed off first. With other burns, the affected area should be rinsed with a large amount of clean water to remove foreign bodies and help stop the burning process. Cold water should never be applied to any person with extensive burns, as it may severely compromise the burn victim's temperature status.

At this stage of management, it is also critical to assess airway status. If the patient was involved in a fire, then it must be assumed that he or she has sustained inhalation injury until proven otherwise, and treatment should be managed accordingly.

Once the burning process has been stopped, and airway status is ensured, the patient should be volume resuscitated according to the Parkland formula. This formula dictates that the amount of Lactated Ringer's solution to deliver in the first twenty four hours after time of injury is:

Fluid = 4cc x %TBSA x weight in kg

%TBSA excludes any first degree burn

Half of this fluid should be given in the first eight hours post injury and the rest in the subsequent sixteen hours. The formula is a guide only and infusions must be tailored to urine output and central venous pressure. Inadequate fluid resuscitation causes renal failure and death.

[edit] Treatment of low-grade burns

A local anesthetic is usually sufficient in managing pain of smaller first-degree and second-degree burns. Lidocaine can be administered to the spot of injury and will generally negate most pain.

[edit] See also

• Sunburn
• Radiation burn
• Bruise
• Branding iron

[edit] References

• St. John Ambulance (2000). First aid: First on the Scene: Activity Book, Chapter 19. ISBN 1-894070-20-8.