Fresnel lens
From Wikipedia, the free encyclopedia
A Fresnel lens is a type of lens invented by Augustin-Jean Fresnel (pronounced fre-NELL in scientific and lighting applications, although often pronounced FREZ-nell). Originally developed for lighthouses, the design enables the construction of lenses of large aperture and short focal length without the weight and volume of material which would be required in conventional lens design. Compared to earlier lenses, the Fresnel lens is much thinner, thus passing more light and allowing lighthouses to be visible over much longer distances.
Contents |
[edit] Development
The idea of creating a thinner, lighter lens by making it with separate sections is often attributed to Georges-Louis Leclerc, Comte de Buffon.[1] However, it is difficult to find any other sources that link Buffon to work with optics. French physicist and engineer Augustin-Jean Fresnel is most often given credit for the development of this lens for use in lighthouses. According to Smithsonian, the first Fresnel lens was used in 1822 in a lighthouse on the Gironde River in France, Cardovan Tower; its light could be seen from more than 20 miles out.[2] Scottish physicist Sir David Brewster is credited with convincing the British to use these lenses in their lighthouses.[3][4]
[edit] Detailed information
The Fresnel lens reduces the amount of material required compared to a conventional spherical lens by breaking the lens into a set of concentric annular sections known as Fresnel zones.
In the first (and largest) variations of the lens, each of these zones was a different prism. Though a lens might look like a single piece of glass, closer examination reveals that it is many small pieces. It was not until modern computer-controlled milling equipment (CNC) could turn out large complex pieces that these lenses were single pieces of glass.
For each of these zones, the overall thickness of the lens is decreased, effectively chopping the continuous surface of a standard lens into a set of surfaces of the same curvature, with discontinuities between them. This allows a substantial reduction in thickness (and thus weight and volume of material) of the lens, at the expense of reducing the imaging quality of the lens.
[edit] Graphic examples
2: Cross section of a conventional plano-convex lens of equivalent power |
|
[edit] Uses
For the reasons given above, Fresnel lenses tend to be used in applications where imaging quality is not critical, or where the bulk of a solid lens would be prohibitive. Cheap Fresnel lenses can be stamped or moulded out of transparent plastic and are used in overhead projectors, projection televisions, and hand-held sheet magnifying glasses. Fresnel lenses have been used to increase the visual size of CRT displays in pocket televisions, notably the Sinclair TV80. Fresnel lenses are also used in traffic lights and solar forges.
Perhaps the most widespread use of Fresnel lenses was in automobile headlamps, where they allow the roughly-parallel beam from the parabolic reflector to be shaped to meet requirements for dipped and main beam patterns, often both in the same headlamp unit (such as the European H4 design). For reasons of cost, weight and impact resistance, newer cars have dispensed with glass Fresnel lenses, using multi-faceted reflectors with plain polycarbonate lenses.
High-quality glass Fresnel lenses were used in lighthouses; most are now retired from service. Lighthouse Fresnel lens systems typically include extra annular prismatic elements, arrayed in faceted domes above and below the central planar Fresnel, in order to catch all light emitted from the light source. The light path through these elements can include an internal reflection, rather than the simple refraction in the planar Fresnel element.
Glass fresnel lenses also are used in lighting instruments for theater and motion pictures (see Fresnel lantern); such instruments are often called simply fresnels. The entire instrument consists of a metal housing, reflector, lamp assembly, and fresnel lens. A slot on the housing can hold a colored film (gel) to tint the light. Many fresnel instruments allow the lamp to be moved relative to the lens focal point, which creates a more or less hard-edged light beam. The fresnel lens is useful in the making of motion pictures not only because of its ability to focus the beam brighter than a typical lens, but also because the light is a consistent intensity across the entire width of the beam of light.
American aircraft carriers use fresnel lenses in their optical landing system. The "meatball" light aids the pilot in lining up for the landing. In the center are amber and red lights composed of fresnel lenses. Although the lights are always on, the angle of the lens from the pilot's point of view determines the color and position of the visible light. If the lights appear above the green horizontal bar, the pilot is too high. If it is below, the pilot is too low, and if the lights are red, the pilot is very low.
Fresnel reflectors are also currently being incorporated into next-generation solar thermal energy systems. See solar power for more information. The Polaroid SX-70 camera used a Fresnel reflector as part of its viewing system.
Multi-focal Fresnel lens are also used as a part of retina identification camera, where they provide multiple in- and out-of-focus images of a fixation target inside the camera. For virtually all users, at least one of the images will be in focus, thus allowing correct eye alignment.
Fresnel lenses have also been used in the field of popular entertainment. The British rock artist Peter Gabriel made use of them in his early solo live performances to magnify the size of his head, in contrast to the rest of his body, for dramatic and comic effect. In the Terry Gilliam film Brazil, plastic fresnel screens appear ostensibly as magnifiers for the small CRT monitors used throughout the offices of the Ministry of Information. However, they occasionally appear between the actors and the camera, distorting the scale and composition of the scene to humorous effect.
[edit] Sizes of lighthouse lenses
Fresnel's lighthouse lenses fell into six orders based on their focal length. The largest (first order) lens stands 12 feet (3.7 m) tall and 6 feet (1.8 m) across, with a focal length of 36 inches (0.91 m). The smallest (sixth order) stands only 2 feet (0.60 m) tall, with a focal length of 5.9 inches (14.9 cm).
Subsequent development extended this to seventh and eighth orders, an intermediate three-and-one-half order, and two orders even larger than first: mesoradial and hyperradial.
[edit] Projection uses
Fresnel lenses of different focal lengths (one collimator, and one collector) are used in commercial and DIY projection. The collimator lens has the lower focal length, and is placed closer to the light source, and the collector lens, which focuses the light into the triplet lens, is placed after the projection image (an active matrix LCD panel in LCD projectors).
[edit] Generating solar power
Fresnel reflectors are used in Concentrated Solar Power (CSP) plants to produce energy from the sun.
[edit] References
- ^ "Fresnel lens." Encyclopædia Britannica. 2005. Encyclopædia Britannica Online. 11 November 2005 <http://search.eb.com/eb/article-9035385>.
- ^ Watson, Bruce. “Science Makes a Better Lighthouse Lens.” Smithsonian. August 1999 v30 i5 p30. produced in Biography Resource Center. Farmington Hills, Mich.: Thomson Gale. 2005. <http://libproxy.uncg.edu:2088/servlet/BioRC>.
- ^ "Brewster, Sir David." Encyclopædia Britannica. 2005. Encyclopædia Britannica Online. 11 November 2005 <http://search.eb.com/eb/article-9016395>.
- ^ "David Brewster." World of Invention, 2nd ed. Gale Group, 1999. Reproduced in Biography Resource Center. Farmington Hills, Mich.: Thomson Gale. 2005. <http://libproxy.uncg.edu:2088/servlet/BioRC>.
[edit] External links
- Lighthouse Getaway: Fresnel lens (contains photographs)
- Random Destructive Acts via Focused Solar Radiation
