Triple point
From Wikipedia, the free encyclopedia
In physics and chemistry, the triple point of a substance is the temperature and pressure at which three phases (gas, liquid, and solid) of that substance may coexist in thermodynamic equilibrium.
For example, the triple point temperature of mercury is at −38.8344 °C, at a pressure of 0.2 mPa.
The triple point of water is used to define the kelvin, the SI base unit of thermodynamic temperature. The number given for the temperature of the triple point of water is an exact definition rather than a measured quantity.
[edit] Triple point of water
The single combination of pressure and temperature at which pure water, pure ice, and pure water vapour can coexist in a stable equilibrium occurs at exactly 273.16 kelvins (0.01 °C) and a pressure of 611.73 pascals (ca. 6.1173 millibars, 0.0060373057 atm). At that point, it is possible to change all of the substance to ice, water, or vapour by making infinitesimally small changes in pressure and temperature. Strictly speaking, the surfaces separating the different phases should also be perfectly flat, to avoid the effects of surface tensions.
Water has an unusual and complex phase diagram, although this does not affect general comments about the triple point. At high temperatures, increasing pressure results in first liquid, and then solid, water (above around 109 Pa a crystalline form of ice which is denser than water forms). At lower temperatures the liquid state ceases to appear with compression causing the state to pass directly from gas to solid.
At a constant pressure higher than the triple point, heating ice necessarily passes from ice to liquid then to steam. In pressures below the triple point, such as in outer space where the pressure is low, liquid water cannot exist: Ice skips the liquid stage and becomes steam on heating, in a process known as sublimation.
Triple point cells are useful in the calibration of thermometers. For exacting work, triple point cells are typically filled with a highly pure chemical substance such as hydrogen, argon, mercury, or water (depending on the desired temperature). The purity of these substances can be such that only one part in a million is a contaminant; what is called “six-nines" because it is 99.9999% pure. When it is a water-based cell, a special isotopic composition called VSMOW water is used because it is considered to be representative of “average ocean water” and produces temperatures that are more comparable from lab to lab. Triple point cells are so effective at achieving highly precise, reproducible temperatures, an international calibration standard for thermometers called ITS–90 relies upon triple point cells of hydrogen, neon, oxygen, argon, mercury, and water for delineating six of its defined temperature points.
The zero-elevation or "sea level" of Mars is defined by the height at which the atmospheric pressure corresponds to the triple point of water.
[edit] See also
- Critical point
- Gibbs' phase rule
- ITS-90
- Equations of state
- Vienna Standard Mean Ocean Water (VSMOW)
- Vacuum distillation
[edit] External links
| States of Matter (list) |
|---|
| Solid | Liquid | Gas | Plasma | Colloid | Supercritical fluid | Superfluid | Supersolid | Degenerate matter | Quark-gluon plasma | Fermionic condensate | Bose–Einstein condensate | Strange matter | Melting point | Boiling point | Triple point | Critical point | Equation of state | Cooling curve |
