Broadband Internet access

From Wikipedia, the free encyclopedia

Broadband Internet access, often shortened to "broadband Internet" or just "broadband", is a high data-transmission rate Internet connection. DSL and cable modem, both popular consumer broadband technologies, are typically capable of transmitting faster than a dial-up modem (56 kbit/s (kilobits per second)). Upload speed for a dial-up modem is even slower (31.2 kbit/s for V.90, 44 kbit/s for V.92).

Broadband Internet access became a rapidly developing market in many areas in the early 2000s; one study found that broadband Internet usage in the United States grew from 6% in June 2000 to over 30% in 2003.[1]

Modern consumer broadband implementations, up to 30 Mbit/s, are several hundred times faster than those available at the time the Internet first became popular (such as ISDN and 56 kbit/s) while costing less than ISDN and sometimes no more than 56 kbit/s, though performance and costs vary widely between countries.

"Broadband" in this context refers to the relatively high available bitrate, when compared to systems such as dial-up with lower bitrates (which could be referred to as narrowband).

Contents 1 Overview 2 Technology 2.1 Multilinking Modems 2.2 Dual Analog Lines 2.3 ISDN 2.4 T-1/DS-1 2.5 Rural broadband 2.6 Satellite Internet 2.7 Stratellite 2.8 Remote DSL 2.9 DSL repeater 2.10 Power-line Internet 2.11 Wireless ISP 2.12 iBlast 2.13 WorldSpace 3 Broadband worldwide 4 See also 4.1 Broadband technologies 4.2 Broadband implementations 4.3 Broadband applications 5 External links

[edit] Overview

Broadband is often called high-speed Internet, because it usually has a high rate of data transmission. In general, any connection to the customer of 256 kbit/s (0.250 Mbit/s) or more is considered broadband Internet. The International Telecommunication Union Standardization Sector (ITU-T) recommendation I.113 has defined broadband as a transmission capacity that is faster than primary rate ISDN, at 1.5 to 2 Mbit/s. The FCC definition of broadband is 200 kbit/s (0.2 Mbit/s) in one direction, and advanced broadband is at least 200 kbit/s in both directions. The Organization for Economic Co-operation and Development (OECD) has defined broadband as 256 kbit/s in at least one direction and this bit rate is the most common baseline that is marketed as "broadband" around the world. There is no specific bitrate defined by the industry, however, and "broadband" can mean lower-bitrate transmission methods. Some Internet Service Providers (ISPs) use this to their advantage in marketing lower-bitrate connections as broadband.

In practice, the advertised bandwidth is not always reliably available to the customer; ISPs often allow a greater number of subscribers than their backbone connection can handle, under the assumption that most users will not be using their full connection capacity very frequently. This aggregation strategy works more often than not, so users can typically burst to their full bandwidth most of the time; however, peer-to-peer (P2P) file sharing systems, often requiring extended durations of high bandwidth, stress these assumptions, and can cause major problems for ISPs who have excessively overbooked their capacity. For more on this topic, see traffic shaping. As takeup for these introductory products increases, telcos are starting to offer higher bit rate services. For existing connections, this most of the time simply involves reconfiguring the existing equipment at each end of the connection.

As the bandwidth delivered to end users increases, the market expects that video on demand services streamed over the Internet will become more popular, though at the present time such services generally require specialized networks. The data rates on most broadband services still do not suffice to provide good quality video, as MPEG-2 video requires about 6 Mbit/s for good results. Adequate video for some purposes becomes possible at lower data rates, with rates of 768 kbit/s and 384 kbit/s used for some video conferencing applications, and rates as low as 100 kbit/s used for videophones using H.264/MPEG-4 AVC. The MPEG-4 format delivers high-quality video at 2 Mbit/s, at the high end of cable modem and ADSL performance.

Increased bandwidth has already made an impact on newsgroups: postings to groups such as alt.binaries.* have grown from JPEG files to entire CD and DVD images. According to NTL, the level of traffic on their network increased from a daily inbound news feed of 150 gigabytes of data per day and 1 terabyte of data out each day in 2001 to 500 gigabytes of data inbound and over 4 terabytes out each day in 2002.^{[citation needed]}

[edit] Technology

The standard broadband technologies in most areas are DSL and cable modems. Newer technologies in use include VDSL and pushing optical fiber connections closer to the subscriber in both telephone and cable plants. Fiber-optic communication, while only recently being used in fiber to the premises and fiber to the curb schemes, has played a crucial role in enabling Broadband Internet access by making transmission of information over larger distances much more cost-effective than copper wire technology. In a few areas not served by cable or ADSL, community organizations have begun to install Wi-Fi networks, and in some cities and towns local governments are installing municipal Wi-Fi networks. As of 2006, high speed mobile internet access has become available at the consumer level in some countries, using the HSDPA and EV-DO technologies. The newest technology being deployed for mobile and stationary broadband access is WiMAX.

[edit] Multilinking Modems

It is possible to roughly double your dial-up capability with multilinking technology. What is required is two modems, two phone lines, two dial-up accounts, and ISP support for multilinking, or special software on your end. This option was popular with some high-end users before DSL and other technologies became available.

[edit] Dual Analog Lines

Diamond and other vendors had created dual phone line modems with bonding capability. The speed of dual line modems is faster than 90 kbit/s. To use this modem, the ISP should support line bonding. The Internet and phone charge will be twice the ordinary dial-up charge.

[edit] ISDN

Integrated Service Digital Network (ISDN) is an old digital telephone data service standard.

A primary ISDN line is an ISDN line with 2 data channels (DS0 - 64 kbit/s each). Using Internal ISDN modems, it is possible to bond together 2 or more separate primary ISDN lines to reach the speed of 256 kbit/s or more. The ISDN channel bonding technology was used for video conference application and high-speed data transmission.

ISDN T1 (US standard) line is an ISDN lines with 24 DS0 channels and total speed of 1,544 kbit/s. ISDN E1 (European standard) line is an ISDN lines with 32 DS0 channels and total speed of 2,048 kbit/s.

Advantages:

1. Constant data speed at 64 kbit/s for each DSO channel.
2. Two way high speed data transmission, unlike ADSL.
3. One of the data channels can be used for phone conversation without disturbing the data transmission through the other data channel.
4. No distance limitations like ADSL.

Disadvantages:

1. ISDN modems and telephones are more expensive than ordinary dial up modem.
2. Difficulty in obtaining new ISDN lines.

When a phone call occurs, some of the bandwidth is allocated to the call, reducing the connection speed. When the call ends, the connection increases speed again. ISDN is a relatively low-cost option for rural users with otherwise terrible dial-up access speeds, but it is starting to be phased out and is no longer available in some areas.

[edit] T-1/DS-1

T-1/DS-1 is a type of service which is possible for a rural customer desiring broadband speeds, but the cost can be in the hundreds or thousands of dollars per month depending on the distance from the provider.

These are highly-regulated services traditionally intended for businesses, that are managed through Public Service Commissions (PSCs) in each state, must be fully defined in PSC tariff documents, and have management rules dating back to the early 1980s which still refer to teletypes as potential connection devices. As such, T-1 services have very strict and rigid service requirements which drive up the provider's maintenance costs and may require them to have a technician on standby 24 hours a day to repair the line if it malfunctions. (In comparison, ISDN and DSL are not regulated by the PSCs at all.)

People attempting to establish rural service via a Wireless ISP, ISDN, or T-1 will run into an additional cost issue, where the physical connection (or local loop) is considered separate from the actual Internet service provided from a Point of Presence (POP). In the US the loop alone may cost $1200 per month, and the 1.5 Mbit/s business-class Internet service (with a fixed IP address and a subnet) may cost an additional $1000 per month.

[edit] Rural broadband

One of the great challenges of broadband is to provide service to potential customers in areas of low population density, such as to farmers and ranchers. In cities where the population density is high, it is easy for a service provider to recover equipment costs, but each rural customer may require thousands of dollars of equipment to get connected. A similar problem existed a century ago when electrical power was invented. Cities were the first to receive electric lighting, as early as 1880, while in the United States some remote rural areas were still not electrified until the 1940s, and even then only with the help of federally funded programs like the Tennessee Valley Authority (TVA).

Several rural broadband solutions exist, though each has its own pitfalls and limitations. Some choices are better than others, but are dependent on how proactive the local phone company is about upgrading their rural technology.

[edit] Satellite Internet

Main article: Satellite Internet

This employs a satellite in geostationary orbit to relay data from the satellite company to each customer. Satellite Internet is usually among the most expensive ways of gaining broadband Internet access, but in rural areas it is often the only viable option. However, costs have been coming down in recent times to the point that it is becoming more competitive with other high-speed options.

Satellite internet also has a high latency problem caused by the signal having to travel 35,000 km (22,000 miles) out into space to the satellite and back to Earth again. The signal delay can be as much as 500 milliseconds to 900 milliseconds, which makes this service unsuitable for applications requiring real-time user input such as certain multiplayer Internet games and first-person shooters played over the connection. Despite this, it is still possible for many games to still be played, but the scope is limited to real-time strategy or turn-based games. The functionality of live interactive access to a distant computer can also be subject to the problems caused by high latency. These problems are more than tolerable for just basic email access and web browsing and in most cases are barely noticeable.

There is no simple way to get around this problem. The delay is primarily due to the speed of light being only 300,000 km/second (186,000 miles per second). Even if all other signaling delays could be eliminated it still takes the electromagnetic wave 233 milliseconds to travel from ground to the satellite and back to the ground, a total of 70,000 km (44,000 miles) to travel from you to the satellite company.

Since the satellite is being used for two-way communications, the total distance increases to 140,000 km (88,000 miles), which takes a radio wave 466 ms to travel. Factoring in normal delays from other network sources gives a typical connection latency of 500-700 ms. This is far worse latency than even most dial-up modem users experience, at typically only 150-200 ms total latency.

Most satellite Internet providers also have a FAP (Fair Access Policy). Perhaps one of the largest cons against satellite Internet, these FAPs usually throttle a user's throughput to dial-up speeds after a certain "invisible wall" is hit (usually around 200MB a day). This FAP usually lasts for 24 hours after the wall is hit, and a user's throughput is restored to whatever tier they paid for. This makes bandwidth-intensive activities nearly impossible to complete in a reasonable amount of time (examples include PtP and newsgroup binary downloading).

[edit] Stratellite

Stratosphere Satellite Stratellite is a brand name for a high-altitude stratospheric airship that would provide a stationary communications platform for various types of wireless signals currently carried by communications towers or satellites.

Advantages:

1. Low cost compared to transmission towers and satellite.
2. Easier maintenance and deployment compared to satellite.
3. Wide coverage area (several thousands square km).
4. Smaller antenna compared to Satellite.
5. Can be used for TV broadcasting, mobile phone/GSM, weather prediction, traffic management, emergency/security/defence applications.

Disadvantages:

1. Frequency allocation problem.
2. Possible disruption of service (clouds, heavy rain).
3. Possible collisions with meteors or high-flying jets.

[edit] Remote DSL

This allows a service provider to set up DSL hardware out in the country in a weatherproof enclosure. However, setup costs can be quite high since the service provider may need to install fiber-optic cable to the remote location. Also, the remote site has the same distance limits as the metropolitan service, and can only serve an island of customers along the trunk line within a radius of about 2 km (7000 ft).

Remote DSL access is becoming a sore point for many rural customers, as the technology has been available for some time now and phone companies keep promoting its availability, but at the same time the phone companies keep dragging their feet and are not doing anything to install the remote services. In the United States, this is particularly a problem with the very large multistate independent local exchange carriers (non-RBOCs) that serve mostly rural areas.

[edit] DSL repeater

This is a very new technology which allows DSL to travel longer distances to remote customers. One version of the repeater is installed at approximately 3 km (10,000 ft) intervals along the trunk line, and strengthens and cleans up the DSL signal so it can travel another 3 km (10,000 ft).

[edit] Power-line Internet

This is a new service still in its infancy that may eventually permit broadband Internet data to travel down standard high-voltage power lines. However, the system has a number of complex issues, the primary one being that power lines are inherently a very noisy environment. Every time a device turns on or off, it introduces a pop or click into the line. Energy-saving devices often introduce noisy harmonics into the line. The system must be designed to deal with these natural signaling disruptions and work around them.

Broadband over power lines (BPL), also known as Power line communication, has developed faster in Europe than in the US due to a historical difference in power system design philosophies. Nearly all large power grids transmit power at high voltages in order to reduce transmission losses, then near the customer use step-down transformers to reduce the voltage. Since BPL signals cannot readily pass through transformers, repeaters must be attached to the transformers. In the US, it is common for a small transformer hung from a utility pole to service a single house. In Europe, it is more common for a somewhat larger transformer to service 10 or 100 houses. For delivering power to customers, this difference in design makes little difference, but it means delivering BPL over the power grid of a typical US city will require an order of magnitude more repeaters than would be required in a comparable European city.

The second major issue is signal strength and operating frequency. The system is expected to use frequencies in the 10 to 30 MHz range, which has been used for decades by licensed amateur radio operators, as well as international shortwave broadcasters and a variety of communications systems (military, aeronautical, etc.). Power lines are unshielded and will act as transmitters for the signals they carry, and have the potential to completely wipe out the usefulness of the 10 to 30 MHz range for shortwave communications purposes.

[edit] Wireless ISP

This typically employs the current low-cost 802.11 Wi-Fi radio systems to link up remote locations over great distances, but can use other higher-power radio communications systems as well.

Traditional 802.11b was licensed for omnidirectional service spanning only 100-150 meters (300-500 ft). By focusing the signal down to a narrow beam with a Yagi antenna it can instead operate reliably over a distance of many miles.

Rural Wireless-ISP installations are typically not commercial in nature and are instead a patchwork of systems built up by hobbyists mounting antennas on radio masts and towers, agricultural storage silos, very tall trees, or whatever other tall objects are available. There are currently a number of companies that provide this service. A wireless internet access provider map for USA is publically available for WISPS.

[edit] iBlast

iBlast was the brand name for a theoretical high-speed (7 Mbps), one-way digital data transmission technology from Digital TV station to users that was developed between June 2000 to October 2005.

Advantages:

1. Low cost, high speed data transmission from TV station to users. This technology can be used for transmitting website / files from Internet.

Disadvantages:

1. One way data transmission and should be combined with other method of data transmission from users to TV station.
2. Privacy/security.
3. Lack of 8VSB tuner built into many consumer electronic devices needed to receive the iBlast signal.

In the end, the disadvantages outweighed the advantages and the glut of fiberoptic capacity that ensued following the collapse of the internet bubble drove the cost of transmission so low that an ancillary service such as this was unnecessary, and the company folded at the end of 2005. The partner television stations as well as over 500 additional television stations not part of the iBlast Network continue to transmit separate digital signals as mandated by the Telecommunications Act of 1996.

[edit] WorldSpace

WorldSpace is a digital satellite radio network based in Washington DC. It covers most of Asia and Europe plus all of Africa by satellite. Beside the digital audio, user can receive one way high speed digital data transmission (150 Kilobit/second) from the Satellite.

Advantages:

1. Low cost (US$ 100) receiver that combine digital radio receiver and data receiver. This technology can be used for transmitting website / files from Internet.
2. Access from remote places in Asia and Africa.

Disadvantages:

1. One way data transmission and should be combined with other method of data transmission from users to Worldspace HQ,
2. Privacy/security.

[edit] Broadband worldwide

Main article: Broadband Internet access worldwide

See also List of countries by broadband users for June 2006 stats

Broadband subscribers per 100 inhabitants, by technology, December 2006 in the OECD (source)

Rank	Country	DSL	Cable	Other	Total	Total Subscribers
1	Denmark	17.4%	9.0%	2.8%	29.3%	1,590,539
2	Netherlands	17.2%	11.1%	0.5%	28.8%	4,705,829
3	Iceland	26.5%	0.0%	0.7%	27.3%	80,672
4	Korea	13.2%	8.8%	4.5%	26.4%	12,770,911
5	Switzerland	16.9%	9.0%	0.4%	26.2%	1,945,358
6	Finland	21.7%	3.1%	0.2%	25.%	1,309,800
7	Norway	20.4%	3.8%	0.4%	24.6%	1,137,697
8	Sweden	14.4%	4.3%	4.0%	22.7%	2,046,222
9	Canada	10.8%	11.5%	0.1%	22.4%	7,161,872
10	United Kingdom	14.6%	4.9%	0.0%	19.4%	11,622,929
11	Belgium	11.9%	7.4%	0.0%	19.3%	2,025,112
12	United States	8.0%	9.8%	1.4%	19.2%	56,502,351
13	Japan	11.3%	2.7%	4.9%	19.0%	24,217,012
14	Luxembourg	16.0%	1.9%	0.0%	17.9%	81,303
15	Austria	11.2%	6.3%	0.2%	17.7%	1,460,000
16	France	16.7%	1.0%	0.0%	17.7%	11,105,000
17	Australia	13.9%	2.9%	0.6%	17.4%	3,518,100
18	Germany	14.7%	0.3%	0.1%	15.1%	12,444,600
19	Spain	10.5%	3.1%	0.1%	13.6%	5,917,082
20	Italy	12.6%	0.0%	0.6%	13.2%	7,697,249
21	Portugal	7.9%	5.0%	0.0%	12.9%	1,355,602
22	New Zealand	10.7%	0.5%	0.6%	11.7%	479,000
23	Czech Republic	3.9%	2.0%	3.5%	9.4%	962,000
24	Ireland	6.8%	1.0%	1.4%	9.2%	372,300
25	Hungary	4.8%	2.9%	0.1%	7.8%	791,555
26	Poland	3.9%	1.3%	0.1%	5.3%	2,032,700
27	Turkey	2.9%	0.0%	0.0%	3.0%	2,128,600
28	Slovak Republic	2.2%	0.5%	0.2%	2.9%	155,659
29	Mexico	2.1%	0.7%	0.0%	2.8%	2,950,988
30	Greece	2.7%	0.0%	0.0%	2.7%	298,222

[edit] See also

[edit] Broadband technologies

• Fiber-optic communication
• List of device bandwidths
• Plain old telephone service (POTS)
• Baseband
• Narrowband
• Local loop
• Back-channel, a low-speed, or less-than-optimal, transmission channel in the opposite direction to the main channel

[edit] Broadband implementations

• Digital Subscriber Line (DSL), digital data transmission over the wires used in the local loop of a telephone network
• Local Multipoint Distribution Service, broadband wireless access technology that uses microwave signals operating between the 26 GHz and 29 GHz bands
• WiMAX, a standards-based wireless technology that provides high-throughput broadband connections over long distances
• Power line communication, wireline technology using the current electricity networks
• Satellite Internet access
• Cable modem, designed to modulate a data signal over cable television infrastructure
• Fiber to the premises, based on fiber-optic cables and associated optical electronics
• High-Speed Downlink Packet Access (HSDPA), a new mobile telephony protocol, sometimes referred to as a 3.5G (or "3½G") technology
• Evolution-Data Optimized (EVDO), is a wireless radio broadband data standard adopted by many CDMA mobile phone service providers

[edit] Broadband applications

• Broadband telephony
• Broadband radio
• Broadband receiver
• Bandwidth cap

[edit] External links

• Making User-Centric Broadband in Access a Reality, Alcatel, June 13, 2005, Strategy White Paper
• Corporate vs. Community Internet, AlterNet, June 14, 2005, - on the clash between US cities' attempts to expand municipal broadband and corporate attempts to defend their markets
• Marshall University Center for Business and Economic Research, comprehensive study of the economics of broadband internet access
• Broadband Research in Canada, academic research on broadband usage, Ryerson University

v • d • e Internet access methods
Wired:	Dial-up, ISDN, DSL, Cable, Fiber Optic, Power-line internet
Wireless:	Wi-Fi, WiBro, WiMAX, UMTS-TDD, HSDPA, Satellite