Digital Radio Mondiale

From Wikipedia, the free encyclopedia

Digital Radio Mondiale (DRM) is a set of digital audio broadcasting technologies designed to work over the bands currently used for AM broadcast, particularly shortwave. DRM can fit more channels than AM, at higher quality, into a given amount of bandwidth, using various MPEG-4 codecs.

It is also the name of the international non-profit consortium designing and implementing the platform. Radio France Internationale, TéléDiffusion de France, Deutsche Welle, Voice of America, Telefunken (new: Transradio) and Thomcast (new: THOMSON Broadcast & Multimedia) took part at the formation of the DRM consortium.

1 Features
2 Status
- 2.1 International regulation
3 Technique
4 DRM Plus
5 References
6 See also
7 External links

[edit] Features

DRM can deliver FM-comparable sound quality, but on frequencies below 30 MHz (long wave, medium wave and short wave), which allow for very-long-distance signal propagation. VHF is also under consideration. DRM has been designed especially to use older AM transmitters, avoiding major new investments. DRM is robust against the fading and interference which often plagues conventional broadcasting on these frequency ranges.

The encoding and decoding can be performed with digital signal processing, so that a cheap embedded computer with a conventional transmitter and receiver can perform the rather complex encoding and decoding.

As a digital medium, DRM can transmit other data besides the audio channels (datacasting) — as well as RDS-type metadata or program-associated data as Digital Audio Broadcasting (DAB) does. Unlike most other DAB systems, DRM uses in-band on-channel technology and can operate in a hybrid mode called Single Channel Simulcast, simulcasting both analog signal and digital signal.

[edit] Status

The LW/MW/SW standard has been approved by the IEC, and the ITU has approved its use in most of the world. Approval for ITU region 2 (North and South America and the Pacific) is pending amendments to existing international agreements. The inaugural broadcast took place on June 16, 2003, in Geneva, Switzerland, at the ITU's annual World Radio Conference.

Current broadcasters include BBC World Service [1],Radio Luxembourg, biteXpress, Passion Radio, Radio Canada International, Deutsche Welle, and Radio New Zealand international.

Until now DRM receivers have typically used a personal computer. A few manufacturers are presently producing stand alone DRM receivers (Sangean, Morphy Richards, Starwaves). Kenwood and Fraunhofer produced a prototype standalone receiver chip in September 2006 [2]. It will be produced by STMicroelectronics [3]. Himalaya will also demonstrate their two models in fall 2006.

Morphy Richards has recently announced the start of mass production DRM receivers, which are being promoted by the broadcaster Deutsche Welle [4]. The receivers cost under €200 or £149.99 in the UK (as of October 2006), and are expected to drop further as production continues. At the time of writing, Morphy Richards are only distributing these sets around Germany, Austria and the UK, but Europe-wide distribution is expected shortly.

Digital Radio Mondiale is being considered by Ofcom for introduction in Britain in 2012 on the present AM medium wave band. The British Broadcasting Corporation BBC has announced that it is to undertake a trial of the digital radio mondiale (DRM) technology, which will allow it to explore digital radio using medium-wave frequencies. The trial will broadcast BBC Radio Devon using the new technology in the Plymouth area and will last for a year from the end of April 2007.

[edit] International regulation

On 28 September 2006, the Australian spectrum regulator, the Australian Communications and Media Authority, announced that it had "placed an embargo on frequency bands potentially suitable for use by broadcasting services using Digital Radio Mondiale..." being "5950–6200, 7100–7300, 9500–9900, 11650–12050, 13600–13800, 15100–15600, 17550–17900, 21450–21850 and 25670–26100 kHz[5]

[edit] Technique

[edit] Source coding

Useful bitrates with DRM range from 8 kbit/s to 20 kbit/s for a standard broadcast channel (10 kHz bandwidth). It is possible to achieve bitrates up to 72 kbit/s by using more bandwidth than 10 kHz. Useful bitrate depends also on other parameters like wanted robustness to errors (error coding), power needed (modulation scheme), robustness in regard to propagation conditions (multipath, doppler). So DRM offers the possibility to use different audio coding system (source coding) depending on the bitrate:

MPEG-4 HE-AAC (High Efficiency - Advanced Audio Coding). AAC is a perceptual coder suited for voice and music and the High Efficiency is an optional extension for reconstruction of high frequencies (SBR: spectral bandwidth replication) and stereo image (PS: Parametric Stereo).
MPEG-4 CELP which is a parametric coder suited for voice only (vocoder) but that is robust to errors and needs a small bitrate.
MPEG-4 HVXC which is also a parametric coder for speech programs that uses an even smaller bitrate than CELP.

All codecs can optionally be combined with Spectral Band Replication.

Broadcasters have some freedom of choice depending on the material they send. The most commonly used mode is HE-AAC (also called AAC+) that offers an acceptable audio quality somewhat comparable to FM broadcast.

[edit] Bandwidth

DRM broadcasting can be done on different bandwidths:

9 kHz or 10 kHz which are the standard bandwidth of an AM broadcasting channel so existing frequency plan can be reused.
4.5 kHz or 5 kHz which are half channels. The idea is to offer a possibility for the broadcaster to do simulcast and use half a channel for AM and the other half for DRM. However the resulting bitrate and audio quality is less.
18 kHz or 20 kHz which correspond to a coupling of two adjacent channels. It offers the possibility to offer a better audio quality or to multiplex audio channels in the same transmitter.

[edit] Modulation

The modulation used for DRM is COFDM (Coded Orthogonal Frequency Division Multiplexing), where every carrier is modulated with QAM (Quadrature Amplitude Modulation) with a choosable error coding.

The choice of transmission parameters depends on signal robustness wanted, propagation conditions. Transmission signal is affected by noise, interference, multipath wave propagation and Doppler effect.

It is possible to choose among several error coding schemes and several modulation patterns: 64-QAM, 16-QAM and 4-QAM. OFDM modulation has some parameters that must be adjusted depending on propagation conditions. This is the carrier spacing which will determine the robustness against Doppler effect (which cause frequencies offsets, spread: Doppler spread) and OFDM guard interval which determine robustness against multipath propagation (which cause delay offsets, spread: delay spread). The DRM consortium has determined 4 different profiles corresponding to typical propagation conditions:

A: Gaussian channel with very little multipath propagation and Doppler effect. This profile is suited for local or regional broadcasting.
B: multipath propagation channel. This mode is suited for medium range transmission. It is nowadays frequently used.
C: similar to mode B, but with better robustness to Doppler (more carrier spacing). This mode is suited for long distance transmission.
D: similar to mode B, but with a resistance to large delay spread and Doppler spread. This case exists with adverse propagation conditions on very long distance transmissions. The useful bitrate for this profile is decreased.

The tradeoff between these profiles stands between robustness, resistance in regards to propagation conditions and useful bitrates for the service. This table presents some values depending on these profiles. The more the carrier spacing is the more the system is resistant to Doppler effect (Doppler spread). The more the guard interval is the more the system is resistant to long multipath propagation (delay spread).

The resulting low-bitrate digital information is modulated using COFDM. It can run in simulcast mode by switching between DRM and AM, and it is also prepared for linking to other alternatives (e.g. DAB or FM services).

DRM has been tested successfully on shortwave, mediumwave (with 9 as well as 10 kHz channel spacing) and longwave.

Mode	OFDM Carrier spacing (Hz)	Number of carriers				Symbol length (ms)	Guard interval length (ms)	Nb symbols per frame
Mode	OFDM Carrier spacing (Hz)	9 kHz	10 kHz	18 kHz	20 kHz	Symbol length (ms)	Guard interval length (ms)	Nb symbols per frame
A	41,66	204	228	412	460	26,66	2,66	15
B	46,88	182	206	366	410	26,66	5,33	15
C	68,18	*	138	*	280	20,00	5,33	20
D	107,14	*	88	*	178	16,66	7,33	24

There is also a lower bandwidth two-way communication version of DRM as a replacement for SSB communications on HF [6]- note that it is NOT compatible with the official DRM specification.

The Dream software ( http://drm.sourceforge.net/ ) will receive the commercial versions and also limited transmission mode using the FAAC AAC encoder.

[edit] Error coding

Error coding can be chosen to be more or less robust.

This table show an example of useful bitrates depending on protection classes, OFDM propagation profiles (A or B), carrier modulation (16QAM or 64QAM) and channel bandwidth (9 or 10 kHz):

Protection class	A (9 kHz)	B (9 kHz)	B (10 kHz)		C (10 kHz)		D (10 kHz)
Protection class	64-QAM	16-QAM	16-QAM	64-QAM	16-QAM	64-QAM	16-QAM	64-QAM
0	19,6 kbit/s	7,6	8,7	17,4	6,8	13,7	4,5	9,1
1	23,5	10,2	11,6	20,9	9,1	16,4	6,0	10,9
2	27,8	-	-	24,7	-	19,4	-	12,9
3	30,8	-	-	27,4	-	21,5	-	14,3

[edit] DRM Plus

While DRM currently covers the broadcasting bands below 30 MHz, the DRM consortium voted in March 2005 to begin the process of extending the system to the VHF bands up to 120 MHz. DRM Plus (DRM+) will be the name of this technology. Design, development and testing are expected to be completed by 2007-2009.

Wider bandwidth channels will be used, which will allow radio stations to use higher bit rates, thus providing higher audio quality. One likely channel bandwidth is 50 kHz, which will allow DRM Plus to carry radio stations at near CD-quality. A 100 kHz DRM+ channel has sufficient capacity to carry one mobile TV channel: it would be feasible to distribute mobile TV over DRM+ rather than DMB or DVB-H.

[edit] References

[edit] See also

AMSS AM signalling system
Digital Audio Broadcasting (DAB)
Digital Multimedia Broadcasting (DMB)
DVB-H (Digital Video Broadcasting - Handhelds)
DVB-T (Digital Video Broadcasting - Terrestrial)
ETSI Satellite Digital Radio (SDR)
HD Radio, American system for digital radio in FM-band
ISDB-T, Japanese system for digital radio and television
Software licensing

[edit] External links

[edit] DRM in general

Digital Radio Mondiale (DRM) - official homepage
DRM Info with transmitter pictures
Map of DRM capable transmitter sites worldwide with frequency schedule etc.
hard-core-dx: Latest news on DRM
(pdf) DRM - progress on the receiver front
A Listeners' Guide to Digital AM (DRM)
DRM Patent Licensing
DRM - Digital Radio Mondiale - Digital AM radio below 30 MHz
UK Digital Radio News
Kortbølge stationsdatabase kan downloades efter registrering (tager nogle dage): The World Top Shortwave Broadcasting Database: "This ILGRadio Database is now in use by more than 23 000 listeners, living in 139 countries all over the world!"
DRM Digital Radio - A broadcasters view of the future

[edit] DRM hardware

[7] Digital Radio Mondiale on a single chip.
TRANSRADIO, Germany - DRM Signal Generator DRM DMOD2 and DRM Transmitters

[edit] DRM software

DRM Software Radio developed by the Fraunhofer IIS
Dream DRM receiver. An open source software radio published by the University Darmstadt (Germany)
HamDream A modificated DREAM receiver supporting 2.5 kHz bandwidth.
Diorama DRM receiver. An open source DRM receiver written in MATLAB by the Institute of Telecommunications of the University Kaiserslautern (Germany))
Spark A DRM software transmitter developed by the University of Applied Sciences Kaiserslautern (Germany)

Digital Radio Mondiale

From Wikipedia, the free encyclopedia

Contents

[edit] Features

[edit] Status

[edit] International regulation

[edit] Technique

[edit] Source coding

[edit] Bandwidth

[edit] Modulation

[edit] Error coding

[edit] DRM Plus

[edit] References

[edit] See also

[edit] External links

[edit] DRM in general

[edit] DRM hardware

[edit] DRM software

[edit] DRM radio techniques

[edit] DRM's COFDM

[edit] Index

Views

Navigation

interaction

Search

In other languages